Overview
The Rubicon Express RE7141FPR is a 2.5-inch standard coil lift kit for Jeep JK suspension systems, with Fox Performance Resi shocks included. It replaces the front and rear coil springs and adds front alignment washers for caster adjustment, a rear track bar bracket, bump stops and extended sway bar end links. It fits the most popular Jeep JK suspension systems, which covers the 2007-2018 Jeep Wrangler (JK).
This is the standard coil version with Fox shocks. Its lift range on the fitment chart is 2.5 to 3.5 inches. The shocks are Fox branded and fall under Fox’s own warranty rather than the Rubicon Express Advantage Warranty.
Key features
- 2.5-inch lift from replacement front and rear coil springs
- Fox Performance Resi shocks
- Front alignment washers for caster adjustment
- Rear track bar bracket
- Extended sway bar end links
- Bump stops
- Designed to be easily upgraded
Before you install
A coil spring lift changes ride height at all four corners, so the springs, shocks and sway bar links work as one system. The Fox shocks supplied with this kit are set up for the new spring height. Bump stops and the rear track bar bracket also control how far the axle travels, which matters on rough trails and when the vehicle is loaded.
Caster is the setting most affected by front alignment washers. Once the washers are in place, the front end should be aligned before regular use. Uneven tire wear and a pull under braking are early signs that the alignment is off. Choose wheels and tires only after the final ride height is known, since lift changes the clearance you need.
- Inspect sway bar end link bushings after the first few trail runs
- Re-torque suspension hardware once the vehicle has settled
- Check brake hoses and wiring for clearance at full suspension travel
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7141FPR |
| UPC | 700008204401 |
| Kit type | Standard coil lift |
| Lift height | 2.5 inches |
| Coil springs | Front and rear replacement |
| Shocks | Fox Performance Resi, included |
| Caster adjustment | Front alignment washers |
Vehicle fitment
It fits the most popular Jeep JK suspension systems, covering the 2007-2018 Jeep Wrangler (JK).
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front alignment washers are there to adjust caster, so an alignment should be done after the lift is in and the washers are set. The extended sway bar links and the new track bar bracket also change how the axles locate, so check the alignment and driveline angles once the work is complete.
What’s included
The kit includes front and rear replacement coil springs, front alignment washers, a rear track bar bracket, bump stops, extended sway bar end links and Fox Performance Resi shocks.





