Overview
The Fabtech front bolt-on track bar bracket, part number FABFTS24125, is a front bracket for the Jeep Wrangler JK. It is designed for 3 to 5 inch lifts and bolts on with a support piece. The bracket gives the front track bar a mounting point that suits a lifted front axle, so the bar can be set to keep the axle centered.
A track bar bracket relocates or re-angles where the bar attaches, which matters once a lift changes the angle of the bar. The design is developed with software-driven engineering and in-house fabrication.
Because the bracket is made for a fixed lift range, match it to the height of your lift before ordering. The support piece is part of the bolt-on design and helps the bracket hold its position.
Key features
- Front bracket for the track bar
- Designed for 3 to 5 inch lifts.
- Bolt-on design with support
- Fits 2007 to 2018 Wrangler JK models directly.
- Part number FABFTS24125
Matching the bracket to your lift
A front bracket sets the angle at which the track bar attaches, so the mount has to suit the height of the lift. Once the lift changes, a bar that was centered at stock height can pull the axle to one side. Measure your lift and compare it with the bracket’s range before deciding whether this part is right for your build.
Bolt-on brackets rely on the bolts and support piece to hold position under load. Inspect the mounting hardware after the first drives on rough roads, and check that the bar moves freely through its travel. If the bracket shows movement or the bar binds, stop and correct the fit before more driving.
- Check lift height against the bracket range
- Inspect mounting hardware after first use
- Confirm the bar moves freely through full travel
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FABFTS24125 |
| Position | Front |
| Type | Track bar bracket |
| Lift range | 3-5 in. |
| Mounting | Bolt-on with support |
| Fit | Direct fit |
Vehicle fitment
It fits 2007 to 2018 Jeep Wrangler (JK) models, including two-door and four-door bodies. The trims include 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X.
Wrangler TJ, JL and LJ models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the included pieces with your vehicle’s mount points before you start, and confirm whether drilling or welding is needed for your vehicle.
What’s included
The front track bar bracket with its bolt-on support. Check the package contents against your installation before starting.







