Overview
The Rubicon Express RE9989 is a front track bar mount for a custom axle in a Jeep Wrangler TJ, covering the 1997-2006 model years. It mounts on the axle side and is supplied as bare steel that has to be welded.
It is made from 3/16-inch cold rolled steel, laser cut and CNC formed.
Key features
- Front position, axle side
- Laser cut 3/16-inch cold rolled steel
- CNC formed for precision
- Bare steel, welding required
Welding a custom axle mount
A weld-on mount depends on clean metal, a square fit, and a stable setup. Remove mill scale and paint from the contact area before tacking the mount in place, and check that the mount sits where the track bar should sit. Once the axle is set to its intended position, make the final welds in short passes to limit heat distortion.
After welding, inspect each joint for cracks, undercut, and full coverage, and check that the track bar moves freely through its travel. Frame and axle mounts take repeated stress on trail use, so re-inspect the welds after the first few outings. If the work is outside your experience, a qualified shop can weld the mount and confirm the alignment before the vehicle goes back on the road.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9989 |
| UPC | 614901442502 |
| Material | 3/16-inch cold rolled steel |
| Position | Front, axle side |
| Finish | Bare steel |
| Installation | Welding required |
Vehicle fitment
It is for a custom axle in a TJ Wrangler, covering the 1997-2006 model years.
It is designed for the front position on a TJ Wrangler custom axle. Make sure your year, model and trim match before ordering.
Installation notes
The mount is weld-on, so position it on the axle and check the track bar alignment before the final weld.
What’s included
One front track bar mount in bare steel.



