Overview
The Rubicon Express RM10240 is a high-misalignment spacer with a 12mm bore. It is CNC machined and zinc plated, and it allows a greater operating angle from heim joints.
The spacer is a universal fit part, so no vehicle is named. Confirm that the 12mm bore matches the heim joint and hardware in your build before ordering.
Key features
- High-misalignment spacer
- 12mm bore
- CNC machined
- Zinc plated for corrosion resistance
- Allows greater operating angle from heim joints
Checking clearance and wear
Adding articulation at a heim joint changes the angle the joint sees under load, so the surrounding parts need room to move. Before installing a 12mm bore spacer, look for contact with brackets, tie rods, or body parts across the full range of motion. Clearance that looks fine at rest can close up when the axle or steering is turned hard.
Heim joints wear with use, and a spacer that is loose or rubbing should be checked right away. Look for play in the joint, corrosion on the zinc finish, and signs of wear where the spacer sits against the housing. Replacing a worn joint together with its spacer usually gives a more predictable result than swapping one part alone.
- Check full steering lock for contact
- Look for play at the joint each season
- Replace worn hardware alongside the spacer
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM10240 |
| UPC | 614901444803 |
| Bore | 12mm |
| Machining | CNC machined |
| Finish | Zinc plated |
| Fitment | Universal fit |
Vehicle fitment
This spacer is universal fit and is not vehicle-specific. Its use depends on the heim joint and bore in your build.
Confirm the 12mm bore against your joint before ordering.








