Overview
The Rubicon Express RM10230 is a high-misalignment heim joint spacer with a 5/8-inch bore. It is universal fit, so it is not built for one year, make or model. Its job is to let a heim joint operate at a greater angle than a standard spacer allows.
These high-misalignment spacers allow more operating angle from the heim joints, and wide misalignment spacers give more misalignment than narrow ones. The spacer is CNC machined and zinc plated for corrosion resistance. Choose the spacer style by how far the joint needs to move, because the part is not sized to a particular vehicle.
Key features
- High-misalignment design for a greater operating angle at the heim joint
- CNC machined body
- Zinc plated for corrosion resistance
- 5/8-inch bore
- Universal fit listed by Rubicon Express
Heim joint basics
A heim joint, also called a rod end, pivots in several directions so a link or track bar can move through its travel. The spacer sets where the joint’s bearing sits relative to the bracket and bolt, so the spacer style decides how far the joint can angle before the housing or bracket contacts something. When a joint runs past its normal range, the usual signs are stiff movement, a clicking or popping sound, and a bearing that wears faster than expected.
Before you buy, measure the bore and the bolt or shaft the spacer will sit on, and check the bracket for clearance at full travel. Wider spacers add angle but change how the joint loads the mount, so the surrounding hardware should be sound. Heim joints and spacers are usually inspected together, so look for bearing play and boot damage when you check the spacer.
- Measure the bore and mounting hardware before ordering
- Check the bracket for clearance at full travel
- Inspect the joint for play after the first few trail runs
- Re-check the jam nut and bolts after initial use
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM10230 |
| UPC | 614901444797 |
| Type | High-misalignment heim joint spacer |
| Bore | 5/8 inch |
| Manufacturing | CNC machined |
| Finish | Zinc plated |
| Fitment listing | Universal fit |
Vehicle fitment
It is universal fit, so it is not a vehicle-specific part. Whether it suits a build depends on the 5/8-inch bore matching the heim joint and on the clearance the extra angle needs at full articulation.
Confirm your vehicle’s year, model and trim before ordering.








