Overview
The ICON Vehicle Dynamics 22061 is a pair of adjustable billet aluminum front sway bar end links for 2018–2026 Jeep Wrangler (JL) and 2020–2026 Jeep Gladiator (JT). They are set up for 2.5 inches of lift and adjust the sway bar angle.
The links adjust while still on the vehicle, so the sway bar angle can be fine-tuned after the lift is in place. They use FK rod end bearings in place of stock bushings, which reduces bushing deflection and allows articulation without binding.
Key features
- Billet aluminum construction with laser etched ICON logos
- Adjustable while installed on the vehicle
- FK rod end bearings in place of stock bushings
- Set up for 2.5 inches of lift.
- Sold as a pair of front links
Articulation and lift geometry
End links are the connection between the sway bar and the suspension, so their angle matters on a lifted truck. As the axle cycles, a link set at the wrong angle can pull the bar and reduce articulation. Adjustable links let the bar sit at the intended angle after the lift settles.
Rod end bearings take the motion that stock bushings used to take, so they need periodic checks. Look for dry joints, dust contamination and play at the stud. Keep the bar setting consistent on both sides so the truck handles the same left and right.
- Check rod ends for play after the first trail outings
- Confirm both links are set to the same length
- Recheck sway bar angle after the suspension settles
- Inspect dust boots and grease the bearings if the design allows
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO22061 |
| Material | Billet aluminum |
| Position | Front |
| Quantity | Pair |
| Adjustment | Adjustable |
| Bearings | FK rod ends |
| Lift setup | 2.5 inches |
Vehicle fitment
ICON lists these links for the 2018–2026 Jeep Wrangler (JL), in two-door and Unlimited four-door body styles, and for the 2020–2026 Jeep Gladiator (JT).
The list does not include the Wrangler JK or any model years outside the ranges above. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the sway bar angle after the 2.5-inch lift is in place, then check it again once the suspension has settled, since the links are adjustable while installed.
What’s included
The kit is a pair of front sway bar end links with FK rod end bearings.






