Overview
The Rubicon Express RE4085 is a rear adjustable lower long arm control arm for the driver side of the 2007–2018 Jeep Wrangler (JK), sold as a single arm. It fits 2 and 4-door models.
A control arm of this type is also called a radius arm or trailing arm. If a radius arm is damaged, replace it with a genuine Rubicon Express Radius Arm. The RE4085 is a direct fit part for the rear lower position.
The arm is identified by its rear lower position and driver side. Being adjustable, it can be lengthened or shortened to set axle position, so the length setting matters during installation.
Key features
- Rear lower long arm control arm
- Adjustable design
- Driver side (left) arm, sold as a single
- For 2 and 4-door models
- Direct-fit design
- It works as a replacement for a damaged radius arm.
Setting arm length correctly
Adjustable control arms change axle position, pinion angle and the way the suspension moves through its travel. Setting the length to the wrong value can throw the axle out of square and shorten bushing life, so take a measurement before tightening the jam nut and bolts at the frame and axle ends.
Bushings and sleeves should be inspected for cracking or heavy wear before reuse, and any worn parts are usually replaced together with the arm. Rear lower arms work with the upper links and track bar, so a change in one often calls for a look at the others.
After installation, recheck torque after the first few drives and have the alignment and driveshaft angles reviewed. Tire rub and brake-line stretch often show up on the first trip with a new arm, so check clearances before a long run.
- Measure both sides to confirm equal length
- Inspect bushings for cracks before reuse
- Check driveshaft angles after any change in length
- Recheck bolt torque after the first drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4085 |
| UPC | 614901441215 |
| Product type | Adjustable long arm lower control arm |
| Position | Rear lower |
| Side | Driver side (left) |
| Quantity | Single |
| Body styles | 2 and 4-door models |
| Fitment | Direct fit |
Vehicle fitment
It fits these 2007–2018 Jeep Wrangler (JK) trims:
- 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X)
Each line gives the model years and make and model, followed by trims in parentheses.
The list covers the Wrangler (JK) only, and this arm is the driver side rear lower arm. It does not include the TJ, LJ or JL generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension work changes ride height, steering geometry, and brake-line and driveline clearances, so professional installation is recommended. Torque hardware to specification, recheck after a few drives, have the alignment checked, and confirm tire and wheel clearance before driving. Follow local regulations on lift height.
What’s included
One rear adjustable lower driver side long arm control arm.
Not included: The passenger side arm is a separate item.
