Overview
The Rubicon Express JK4445R is a 5.5-inch extreme-duty lift kit with a front and rear 4-link long arm suspension and reservoir monotube shocks. It belongs to Rubicon Express’s JK suspension range. The kit includes upper and lower control arms with mounts, a transmission crossmember, lift springs and brake lines, which together cover the main front and rear suspension parts.
The extreme-duty system uses chromoly upper and lower control arms with adjustable settings, Super-Flex spherical ball joints and PT-Meg Super-Ride bushings. The full-width transmission crossmember adds frame rigidity. Its lift height range runs from 5 to 6.99 inches, and optional high-performance monotube shocks are available in other lift heights.
Key features
- 5.5-inch lift height, in the 5 to 6.99-inch range on the chart
- Front and rear 4-link long arm system
- Adjustable chromoly upper and lower control arms
- Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Full-width transmission crossmember
- Reservoir monotube shocks included
- Brake lines and lift springs included
Adjustable arms and alignment
Adjustable control arms let the axle position and pinion angle be set after the lift is in place. That flexibility is useful, but every change shifts the alignment, so the settings should be made in small steps and recorded. Setting the arms at the same length on both sides keeps the axle square to the frame.
Chromoly arms and Super-Flex joints are built for high articulation and rough use. Their joints still wear, and boots and grease fittings should be checked on a regular schedule. Bushings in the arm mounts also carry a lot of load, so their condition affects how the vehicle tracks.
- Set arm lengths evenly on both sides
- Record settings before and after each change
- Inspect joint boots for tears and grit
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4445R |
| UPC | 700007272431 |
| System type | Extreme-duty 4-link long arm with shocks |
| Lift height | 5.5 inches (chart range 5 to 6.99 inches) |
| Control arms | Chromoly upper and lower, adjustable, with mounts |
| Joints | Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Reservoir monotube, included |
| Included hardware | Transmission crossmember, lift springs, brake lines |
Vehicle fitment
It is part of the JK suspension range. Confirm the year and trim that match your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 5.5-inch 4-link lift changes control arm angles, pinion angle and steering geometry, so a full alignment and driveline angle check should follow the install. The brake lines included with the kit should be routed and checked before the vehicle is driven.
What’s included
The kit includes the front and rear 4-link long arm components, upper and lower control arms with mounts, the transmission crossmember, lift springs, brake lines and reservoir monotube shocks.
