Overview
The Rubicon Express RE7141PM is a 2.5 inch progressive coil lift kit with monotube shocks for Jeep Wrangler JK models from 2007 to 2018. It includes the springs and front shocks, so one package covers the lift and the shock replacement.
The kit is designed for more ground clearance, extended wheel travel and room for 35 inch tall tires, and it can be installed without changing driveshafts, exhaust or brake lines. Confirm fit for your model year before ordering.
Progressive coils have a longer extended length than linear coils, which maximizes droop travel, the distance the suspension can extend. The progressive spring rate gives a smooth ride over small bumps and still provides enough rate to prevent harsh bottoming during full compression.
Key features
- 2.5 inch lift height with a listed range of 2.5 to 3.5 inches
- Progressive coil springs with longer extended length for droop travel
- Monotube front shocks included
- Front alignment washers for caster adjustment
- Bump stops, a rear track bar bracket and extended sway bar end links
- Designed to be upgraded later
Monotube front shocks explained
Monotube shocks use a single tube with a piston and gas section, which many buyers choose for steady damping on rough trails. Paired with progressive coils, they handle the changing spring force as the suspension moves. The front shocks carry most of the damping work in this kit, so their condition affects steering feel and control.
Balancing the front and rear helps the vehicle sit level after a lift. If the rear suspension is not part of this kit, check the rear ride height after installation and address any difference before driving far.
- Inspect monotube shock bodies for leaks after rough trail use
- Check shock mounting bolts for torque after the first few drives
- Set caster during the post-install alignment
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7141PM |
| UPC | 700008140251 |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | Progressive coil |
| Kit type | Standard kit |
| Rear lift method | None listed |
| Front shocks | Monotube |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
It fits Jeep Wrangler JK models from 2007 to 2018, including two-door and Unlimited four-door bodies.
Other Wrangler generations, including the TJ, LJ and JL, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Any lift changes alignment and driveline angles, so have the alignment checked after installing the springs and shocks. Set caster with the front alignment washers during that alignment.
What’s included
The kit includes progressive coil springs, monotube front shocks, front alignment washers, bump stops, a rear track bar bracket and extended sway bar end links.






