Overview
The Rubicon Express RE7141T is a 2.5 inch standard coil lift kit with twin tube shocks for Jeep Wrangler JK Unlimited four-door models from 2007 to 2018. It replaces the front and rear coil springs and includes the shocks, so the lift and shock replacement come in one package.
The kit is designed for more ground clearance, extended wheel travel and room for 35 inch tall tires, and it installs without changing driveshafts, exhaust or brake lines. Confirm fit for your model year before ordering.
Fit covers 2007 to 2018 Unlimited models. Confirm your exact model year before ordering.
Key features
- 2.5 inch standard coil lift kit
- Front and rear replacement coil springs
- Twin tube shocks included
- Front alignment washers for caster adjustment
- Bump stops, a rear track bar bracket and extended sway bar end links
- Designed to be upgraded later
Coil lifts and alignment
A coil lift keeps the original control arms and changes ride height through the springs. Because the geometry is mostly unchanged, the vehicle still uses its factory steering and axle layout, although a higher stance shifts caster and driveline angles. Alignment after the install is the most important step for steady tire wear and straight-line tracking.
Twin tube shocks are included in this kit, so the shocks are new when the lift goes in. Check the front and rear shock mounts for clearance once the springs settle, and watch for rubbing against the frame or brake lines during full travel. Look at the bump stops and sway bar links at the first service interval as well.
- Recheck alignment if tires wear on one edge
- Inspect sway bar end links for play during routine service
- Check shock mounts after the first few off-road trips
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7141T |
| UPC | 70000625585 |
| Lift height | 2.5 inch |
| Suspension type | Coil spring kit |
| Kit type | Standard kit |
| Rear lift method | Coil springs |
| Shocks included | Yes, twin tube |
| Fitment | Direct fit |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler JK Unlimited four-door models.
It is designed for Unlimited four-door models. For a two-door Wrangler JK or other generations, confirm fit against your vehicle’s year, model and trim.
Installation notes
Any lift changes alignment and driveline angles, so have the alignment checked after the springs and shocks are installed. Set caster with the front alignment washers during that alignment.
What’s included
The kit includes front and rear replacement coil springs, twin tube shocks, front alignment washers, bump stops, a rear track bar bracket and extended sway bar end links.






