Overview
The Rubicon Express RE6111 is a 4.5-inch Super-Flex short arm lift kit for the Jeep Cherokee XJ, with a rear add-a-leaf and block and no shocks. It fits the 1984-2001 Jeep Cherokee (XJ). The kit replaces the stock XJ suspension parts with Super-Flex front control arms that allow caster adjustment, making it a complete suspension system replacement.
The kit includes replacement front tuned coil springs, a replacement rear add-a-leaf and block, adjustable upper and fixed lower front control arms with serviceable Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and sway bar disconnects. The kit provides 4.5 inches of lift, within the 3 to 4.99-inch range.
Key features
- 4.5-inch lift height, within the 3 to 4.99-inch range
- Adjustable upper and fixed lower front control arms
- Serviceable Super-Flex spherical ball joints
- Front control arms allow for caster adjustment
- Replacement front tuned coil springs
- Replacement rear add-a-leaf and block
- New PT-Meg Super-Ride bushings
- Sway bar disconnects
Choosing a lift height
Lift height affects how the whole suspension works, not just the stance. Higher ride height changes the angle of the driveline and steering linkage, and it can shift the tire clearance at full articulation. Owners who plan to run larger tires often find the front and rear setup needs more attention than the lift itself.
Because this kit is sold without shocks, the existing shocks should be checked before installation. Shocks that are worn or too short for the new ride height can limit travel and wear mounts early. Many owners replace shocks at the same time as a lift so that the damping matches the new geometry. Check bump stops and brake hose length as well, since both can be affected by the new height.
- Check existing shock length and condition
- Inspect brake hoses for stretch at full travel
- Re-check caster and alignment after the install
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE6111 |
| UPC | 614901441505 |
| System type | Super-Flex short arm lift |
| Lift height | 4.5 inches (chart range 3 to 4.99 inches) |
| Rear lift method | Lift block, U-bolts and add-a-leaf |
| Front control arms | Adjustable upper, fixed lower |
| Joints | Serviceable Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Shocks | Not included |
Vehicle fitment
It fits the 1984-2001 Jeep Cherokee (XJ), across the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport versions. Wrangler and Grand Cherokee generations are not covered. Check fit against your vehicle’s year, model and trim before buying.
The Wrangler and Grand Cherokee generations are not part of this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear block and U-bolts change the rear suspension height, and the front control arms set caster, so the alignment should be checked after the lift is in and the caster set.
What’s included
The kit includes replacement front tuned coil springs, a replacement rear add-a-leaf and block, adjustable upper and fixed lower front control arms, serviceable Super-Flex spherical ball joints, PT-Meg Super-Ride bushings and sway bar disconnects.
Not included: shock absorbers.


