Overview
The Rubicon Express RE7121M is a 2.5-inch standard coil lift kit with Mono Tube shocks included. It fits the 2007-2018 Jeep Wrangler (JK). It is the Mono Tube version of the RE7121 and uses the same replacement front and rear coil springs, bump stops, rear track bar bracket and extended sway bar end links.
It was designed for the 07-12 Jeep JK Wrangler and installs without driveshaft, exhaust or brake line changes. It adds ground clearance, extended wheel travel and room for 35-inch tall tires. The maximum tire size is 35 inch x 12.50, and the lift range is 2.5 inches. The kit can be upgraded later.
Key features
- 2.5-inch lift height
- Front and rear replacement coil springs
- Rear track bar bracket
- Bump stops
- Extended sway bar end links
- Mono Tube shocks included
- Maximum tire size of 35 inch x 12.50
Before you install a coil lift
A coil spring lift raises the vehicle by changing spring height and the geometry of the suspension links, so the rest of the drivetrain and steering should be reviewed as part of the job. Shocks are often replaced at the same time because a higher ride height and longer travel put more load on the damping. Check the old shocks, bushings and track bar for wear before you start, since worn parts can affect how the new springs settle.
Tire choice matters as much as the kit itself. Larger tires add weight and change gearing, and they can rub at full compression if the lift and tire size are not matched. Plan the tire size against the maximum for this kit, and recheck clearance after the first drive on a slope or off road.
- Inspect shock mounts and bump stops for cracks
- Re-torque fasteners after the first few trail runs
- Recheck alignment and steering components after installation
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7121M |
| UPC | 70000625586 |
| Kit type | Standard coil lift |
| Lift height | 2.5 inches |
| Rear lift method | Coil springs |
| Shocks | Mono Tube, included |
| Maximum tire size | 35 inch x 12.50 |
Vehicle fitment
The kit fits the 2007-2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The coil springs, bump stops and sway bar links change ride height and link geometry, so the alignment should be checked after the install.
What’s included
The kit includes front and rear replacement coil springs, a rear track bar bracket, bump stops, extended sway bar end links and Mono Tube shocks.






