Overview
The Rubicon Express JK4R23 is a 3.5-inch extreme-duty long arm lift kit with a 4-link front and radius rear. It fits the 2007-2018 Jeep Wrangler (JK). The kit includes upper and lower control arms, a transmission crossmember, lift springs, brake lines, a track bar and a drag link, and it has no shocks.
The radius geometry keeps pinion and driveshaft angles in phase while limiting suspension jacking and squat. The system is engineered to work with the Jeep’s electronic stability controls and the Rubicon edition electronic sway bar, leaving factory safety features in place. The chromoly radius long arms and the full-width transmission crossmember complete the drivetrain mount.
Key features
- 3.5-inch lift height, within the 3 to 4.99-inch range
- Front 4-link and rear radius long arm layout
- Chromoly radius long arms
- Upper and lower control arms included
- Transmission crossmember included
- Lift springs, brake lines, track bar and drag link included
- Designed to work with electronic stability controls
Radius arms and pinion angle
Radius arms locate the axle with a longer, fixed link to the frame, which lets the axle move up and down with less change in the pinion angle than a standard leaf setup. The arms carry braking and drive loads, so the bushings and mounts are worth checking after the first trail season. Track bars and drag links keep the axle centered and should be checked for play at the same time.
A lift changes the relationship between the transmission and the axle, which is why driveline angles need attention. Small angle changes can show up as vibration at highway speed, so a shop check after installation is a good idea. Keep the lift springs, brake lines and track bar in good condition, and inspect each part at regular service intervals.
- Check the track bar ends for play
- Inspect radius arm bushings and mounts
- Recheck driveline vibration after the install
- Look at brake hose length after the lift
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4R23 |
| UPC | 70000651245 |
| System type | Extreme-duty front 4-link and rear radius long arm |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Shocks | Not included |
| Included hardware | Upper and lower control arms, transmission crossmember, lift springs, brake lines, track bar, drag link |
Vehicle fitment
It fits the 2007-2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and X versions.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The radius arms and 4-link change pinion and driveline geometry, so the alignment and driveline angles should be checked once the kit is in. Shock absorbers are not included and should be chosen separately.
What’s included
The kit includes the upper and lower control arms, transmission crossmember, lift springs, brake lines, track bar and drag link.
Not included: shock absorbers.
