Overview
The Rubicon Express JL7141E is a 1.5 inch and 2.5 inch standard lift kit for the 2018–2026 Jeep Wrangler (JL), two-door and Unlimited four-door. It uses coil springs and includes shock extensions, and it is designed to improve the JL’s ride quality and off-road performance.
The system is designed to clear 35-inch tires on a loaded non-Rubicon model and 37-inch tires on a Rubicon model.
Key features
- Standard lift kit with coil springs at the rear
- Shock extensions included
- Lift height range of 0 to 3.5 inches
- Designed for 35-inch tires, and 37-inch tires on Rubicon models
- The kit is designed for a simple installation at the factory coil spring location.
Alignment after a coil spring lift
A coil spring lift changes the way the suspension sits and moves, so wheel angles and driveline angles shift once the new springs are in. Because the JL uses the factory coil spring location, a lift like this is usually followed by a wheel alignment and a check of the driveline angles, especially at the rear axle where the springs are fitted. A shop with a driveline angle gauge can confirm the setup.
Tire choice matters as much as the lift itself. Larger tires add weight and change gearing, so tire size should be matched to the setting the kit is designed around. Recheck the bolts on the control arms and shock mounts after the first few drives, and again after each season of off-road use.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7141E |
| Suspension type | Lift kit, standard kit |
| Lift height range | 0 to 3.5 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Tire size | 35-inch |
| Shocks included | Yes |
| Shock series | None listed |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2018–2026 Jeep Wrangler (JL) two-door and Unlimited four-door models, including Sport, Sport S, Rubicon, Sahara, Moab, Willys, Freedom, Islander, High Altitude and 80th Anniversary trims, plus the 4xe and 392 versions.
The list does not include the 2007–2018 Wrangler JK or the 2020–2026 Jeep Gladiator JT. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses the factory coil spring location, so the JL needs an alignment and a check of driveline angles after the lift is installed.
What’s included
The kit includes coil springs and shock extensions. Check the package contents against your installation before starting.











