Select your vehicle
-13%

Rubicon Express 3.5 Inch Super-Flex Short Arm Lift Kit – No Shocks – RE8003

Rubicon Express

Shop Jeep Grand Cherokee ZJ Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express RE8003 3.5 inch Super-Flex short arm lift kit, no shocks
  • Listed fit: 1993–1998 Jeep Grand Cherokee ZJ
  • Adjustable rear control arms, adjustable front track bar and Super-Flex spherical ball joints
  • Retains the factory short arm geometry and mounting points; lift range 3 to 4.99 inches

Description

Overview

The Rubicon Express RE8003 is a 3.5 inch Super-Flex short arm lift kit without shocks for the 1993–1998 Jeep Grand Cherokee ZJ. The lift height range is 3 to 4.99 inches, and the kit keeps the factory short arm geometry and mounting points.

The kit replaces the stock suspension with Rubicon Express components for Grand Cherokees with factory short arm geometry. It includes an adjustable front track bar, lower and upper adjustable rear control arms with Super-Flex spherical ball joints, replacement lift springs and Gen II sway bar disconnects.

Because the kit uses the factory mounting points, the factory short arm design stays in place while ride and flex change. This keeps the ride smoother and more flexible on and off the trail.

Key features

  • 3.5 inch Super-Flex short arm system
  • Adjustable front track bar
  • Adjustable upper and lower rear control arms
  • Super-Flex spherical ball joints
  • Replacement lift springs
  • Gen II sway bar disconnects
  • PT-Meg Super-Ride bushings and stainless steel brake lines; lift range 3 to 4.99 inches

Super-Flex parts and upkeep

Super-Flex spherical ball joints are designed to flex more than standard joints, which suits a short arm suspension working through rough terrain. Because they take most of the articulation load, they need regular checks. Inspect the boots for tears, look for play when the wheel is loaded and replace a joint that binds or clunks.

Adjustable control arms and a track bar should be set correctly after installation so the axle and steering stay centered. Recheck the alignment after the first few drives, since the settings can shift as the new bushings settle. Keep the sway bar disconnects clean and free of grit so they operate smoothly.

  • Inspect ball joint boots for tears
  • Check for play with the wheel loaded
  • Recheck alignment after the first drives
  • Keep sway bar disconnects clean

Specifications

Brand Rubicon Express
Part number RE8003
UPC 614901442137
Lift height range 3 to 4.99 inches
Suspension type Short arm
Kit type Super-Flex short arm
Rear lift method Coil springs
Shocks included No
Fitment Direct fit

Vehicle fitment

It is a direct fit for the 1993–1998 Jeep Grand Cherokee (ZJ), including Limited, Laredo, SE and TSi models.

It does not fit the 1999–2004 Grand Cherokee (WJ), the 2005 and later WK models, or the 2018 and newer Grand Cherokee. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Because the kit replaces the rear control arms and the front track bar, an alignment is needed after installation. The short arm geometry is kept, so the lift works within the factory mounting points.

What’s included

The kit includes an adjustable front track bar, adjustable upper and lower rear control arms with Super-Flex spherical ball joints, replacement lift springs and Gen II sway bar disconnects.

Not included: shocks.

SKU: R/ERE8003 Category:

Specification

Shipping weight 97.80 lbs
Package dimensions 48.00 × 24.50 × 13.00 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the RE8003 fit a 1996 Grand Cherokee ZJ?

Yes. The kit covers 1993 to 1998 Jeep Grand Cherokee ZJ models, so a 1996 model is included. Confirm the trim and body style before ordering.

Does the RE8003 include shocks?

No. Shocks are not included, so you will need your current shocks or a separate set that suits the 3.5 inch lift.

Does the RE8003 keep the factory short arm mounting points?

Yes. The kit keeps the factory short arm suspension design and uses the factory mounting points, while adding adjustable control arms and a front track bar.

Do Super-Flex ball joints need regular service?

Yes, they need inspection. Check the boots for tears, look for play when the wheel is loaded and replace any joint that binds or clunks. Greasing and boot checks are part of routine upkeep on a lifted ZJ.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Grand Cherokee ZJ Lift Kits on Amazon