Overview
The Rubicon Express 3.5-inch lift kit, part number JL7099, is a standard coil spring lift for the 2018–2026 Jeep Wrangler (JL). It fits 2-door and Unlimited 4-door models and gives a lift height range of 0 to 3.5 inches.
The rear is lifted with coil springs, and the kit lists 37-inch tires as its tire size. No shocks are included, and the kit lists no front or rear shocks, so shocks are a separate item.
Because the kit changes the suspension geometry, the alignment and driveline angles are covered in the installation notes below.
- 3.5-inch lift for the 2018 JL and later 2-door and Unlimited 4-door Wranglers
- Rear lift with coil springs
- Lift height range of 0 to 3.5 inches
- Designed around a 37 inch tire size.
- Standard kit with no shocks included
Choosing shocks and alignment
A lift that raises the body without new shocks can leave the stock shocks working at the wrong length, which may affect ride quality and control. Choosing shocks that match the new ride height helps keep the suspension in its working range. Compare lengths and mount styles against the vehicle before buying.
Coil spring lifts often change how the axle and driveline sit, so alignment and driveline angles should be checked after installation. Look for uneven tire wear, vibration at speed, or a clunk when accelerating, since those can point to angle problems. Inspect the bushings and boots over time.
Tire choice matters too, since a 37 inch tire changes gearing and clearance. Check for rub points at full steering and full compression before driving far.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JL7099 |
| Suspension type | Lift kit, standard kit |
| Lift height range | 0 to 3.5 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Front shocks | None |
| Rear shocks | None |
| Shocks included | No |
| Tire size | 37 inches |
| Fit | Direct fit |
Vehicle fitment
It fits 2018–2026 Jeep Wrangler (JL) models in the Rubicon, Sport, Sport S, Sahara, High Altitude, Moab, Willys, Freedom, Islander and 80th Anniversary versions, in both 2-door and 4-door bodies. The JK and earlier Wrangler generations are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift kit changes alignment and driveline angles, so have the alignment checked and the driveline angles measured after installation. With no shocks in the kit, plan on new shocks for the front and rear.
What’s included
The kit is a standard lift with coil springs for the rear and no shocks. Verify the full parts list against your installation before starting.









