Overview
The RE7000-3T is a 3.5-inch Super-Flex short arm lift kit with twin tube shocks, built for TJ and LJ Wranglers that still run factory short arm geometry. It includes eight new control arms, adjustable upper front and rear arms, serviceable Super-Flex spherical ball joints, an adjustable front track bar, replacement lift springs and Gen II sway bar disconnects.
The TJ covers 1997-2006 models and the LJ covers 2004-2006 models. The system combines flexibility and handling for TJ and LJ Wranglers. It adds extended bump stops and longer front stainless steel brake lines, and twin tube shocks are included, so it is a complete package with shocks.
Key features
- 3.5-inch lift height, in the 3 to 4.99-inch range on the chart
- Eight new control arms
- Adjustable upper front and rear control arms
- Serviceable Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Adjustable front track bar
- Gen II sway bar disconnects
- Extended bump stops and longer front stainless steel brake lines
Upgrades and related parts
Short arm systems depend on the arms, track bar and springs working together. Replacing one piece without the others can change the axle position and steering feel, so it is usually better to keep the set matched. Ball joints and bushings should be inspected whenever the lift is serviced, because they carry most of the load at the arm ends.
Steering components often need attention with a lift this size. Tie rod ends, drag links and steering stops should be checked for play and clearance once the new track bar is in. A steering damper is a common add-on for trail use, though it is an extra purchase rather than part of this kit.
Brake lines, sway bar disconnects and bump stops move with the suspension, so routing and clearance should be checked after each service. Disconnected sway bars give more articulation on the trail, but they change body roll on the road, so decide how the vehicle will be used before choosing a sway bar setup.
- Check tie rod ends and drag link for play
- Inspect ball joint boots at each service
- Recheck brake line routing after installation
- Keep the arm set matched when replacing parts
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7000-3T |
| UPC | 614901453140 |
| System type | Super-Flex short arm lift |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Control arms | Eight new; adjustable upper front and rear |
| Lift springs | Replacement, 3.0-inch front and 3.5-inch rear |
| Shocks | Twin tube, included |
Vehicle fitment
It is for TJ and LJ Wranglers, covering the 1997-2006 TJ and 2004-2006 LJ model years.
Confirm fit for your vehicle’s year, model and trim before ordering. This kit is built for factory short arm geometry, so long arm vehicles need a different system.
Installation notes
The kit replaces the control arms, track bar and lift springs, so the alignment should be checked after installation.
What’s included
The kit includes eight new control arms, adjustable front track bar, replacement lift springs, extended bump stops, longer front stainless steel brake lines, Gen II sway bar disconnects and twin tube shocks.



