Overview
The Rubicon Express 3.5 Inch Extreme-Duty Long Arm Lift Kit with Rear Track Bar and Mono Tube Shocks (part number RE7213M) is a long arm lift for the Jeep TJ, with a stated lift height range of 3 to 4.99 inches. The kit includes mono tube shocks.
Rubicon Express sells this Extreme-Duty long arm system as a complete suspension replacement for the TJ. Longer control arms are the design basis, aimed at better lifted geometry with added stability and trail traction.
Key features
- Chromoly long arms for the Extreme-Duty system
- New PT-Meg Super-Ride bushings for on- and off-road performance
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs
- Mono tube shocks included
- Rear track bar included
- Three-piece belly pan for access to the transfer case and transmission
Mono tube shocks in use
Mono tube shocks use a single tube with a floating piston, which tends to keep damping steady after repeated hits. That steadiness helps a lifted TJ over washboard or rock ledges. The shock body is larger than many twin tube designs, so check clearance around the new arms through full travel.
After the first short drive, revisit the shock mounts and bushings once they have settled. Retighten fasteners, and look for oil weeping at the shaft seal or unusual noise. Mono tubes are usually replaced as a unit, so a worn shock is generally swapped rather than rebuilt at home.
- Check shock body clearance at full travel
- Torque mounting bolts after the first drives
- Watch for oil weeping at the shaft seal
- Keep the track bar bushings in view during inspections
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7213M |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Extreme-Duty long arm |
| Rear lift method | Coil springs |
| Shock absorbers | Mono tube, included |
| Track bar | Rear, included |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the Jeep TJ, covering the 1997–2006 Wrangler (TJ) with no trim limit applied. LJ, JK and JL Wranglers fall outside this fit.
The LJ, JK and JL Wranglers are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The long arms replace the factory arms, so the install is more involved than a spring change. Have the front and rear alignment set and check the driveline angles when the work is finished.
What’s included
The kit covers chromoly long arms, PT-Meg bushings, Super-Flex spherical ball joints, tuned lift springs, mono tube shocks, a rear track bar and a three-piece belly pan.


