Overview
The Rubicon Express JK4R23FP is a 3.5 inch extreme duty 4-link long arm system for the Jeep Wrangler JK, sold with Fox Performance shocks. The front uses a 4-link layout and the rear uses radius arms.
The kit is one of the Rubicon Express kit numbers built for the most popular Jeep JK suspension systems, and it comes with upper and lower control arms, a transmission crossmember, a track bar, a drag link, brake lines and lift springs.
The Fox Performance shocks are covered by the FOX warranty and are not eligible for the Rubicon Express Advantage Warranty.
Key features
- Extreme duty 4-link long arm system
- Front 4-link and rear radius arms
- Upper and lower control arms included
- Transmission crossmember
- Track bar and drag link
- Brake lines included
- Fox Performance shocks
Choosing the right setup
A front 4-link with a rear radius arm layout gives a mix of control at both ends of the vehicle. The front 4-link keeps the axle steady under braking and acceleration, while the radius arms in the rear control wrap on hard launches. Choosing a kit like this means thinking about how the front and rear geometry will work together, since each end affects the other during articulation.
Care for the setup centers on the joints and bushings. Inspect the control arms, track bar and drag link for play, and check the brake lines for stretch after the lift. Driveline angles and alignment are worth rechecking after the first few outings, because the new geometry can settle over time and shift the wear pattern on the tires.
- Check brake lines for stretch after installation
- Inspect the track bar and drag link joints for play
- Recheck alignment after the first few outings
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | JK4R23FP |
| Lift height | 3.5 inch |
| Lift height range | 2.5 to 3.5 inches |
| Suspension type | Extreme duty 4-link long arm |
| Front | 4-link |
| Rear | Radius arm |
| Springs | Lift springs |
| Shocks | Fox Performance, included |
| Warranty | FOX warranty on the shocks |
Vehicle fitment
The kit fits the 2007–2018 Jeep Wrangler (JK), which covers the most popular Jeep JK suspension systems.
The JL, the Gladiator, and the TJ and LJ are not included in this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 4-link front and radius rear layout changes axle location and driveline angles, so have both checked after installation. Trucks from 2012 onward may need an exhaust modification or a front drive shaft.
What’s included
Upper and lower control arms, the 4-link front components, radius arms for the rear, a transmission crossmember, a track bar, a drag link, brake lines, lift springs and Fox Performance shocks.






