Overview
The Rubicon Express RE7145 is a 3.5-inch sport lift for 4-door Jeep JK Wrangler models. It corrects steering and control arm geometry that a lift can disturb, which helps reduce bump steer and increases anti-dive for braking. It includes a high steer kit, control arm geometry correction brackets and rear cam bolts for pinion angle adjustment.
The sport kit is designed for 07+ JK and JK Unlimited models with a 3.5-inch suspension lift, and it supports ride quality and handling. The 3.5-inch front and rear replacement coil springs are included, while shocks are not, so existing shocks can be reused or a separate set chosen.
Key features
- 3.5-inch lift with front and rear replacement coil springs
- New high steer kit with a solid drag link that accepts OE tie rod ends
- Steering stabilizer relocated above the drag link for ground clearance
- Control arm geometry correction brackets
- Rear cam bolts for pinion angle adjustment
- Rear track bar bracket and extended sway bar end links
- Bump stops
- Designed to be upgraded to the Super-Flex system later
Steering geometry after a lift
Raising a Jeep changes the angles of the steering and control arms, which can lead to bump steer and uneven braking under load. A high steer kit and control arm correction brackets help keep those angles closer to the factory setup. The drag link and tie rod ends carry the steering loads, so their condition should be checked along with the rest of the front end.
The rear cam bolts adjust pinion angle, which matters for driveline vibration after a lift. Set the pinion angle once the lift is installed and check it again after any change in tire size or load. Shocks are not included, so choose a set that suits the new height and the way the vehicle is driven.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7145 |
| UPC | 700007257281 |
| Lift height | 3.5 inches (chart range 3 to 4.99 inches) |
| Body style | 4-door models |
| Suspension type | Sport short arm kit |
| Coil springs | 3.5-inch front and rear replacement |
| Shocks | Not included |
| Made in | USA |
Vehicle fitment
This kit fits 4-door Jeep JK and JK Unlimited models from 2007 onward, which places it on the 2007-2018 Jeep Wrangler (JK).
It is made for 4-door JK models, not 2-door models.
Installation notes
The high steer kit and control arm brackets change the steering and control arm angles, so an alignment and driveline check should follow the install. The rear cam bolts adjust pinion angle, so the pinion angle should be checked once the install is finished.
What’s included
The kit includes the high steer kit with a solid drag link, control arm geometry correction brackets, rear cam bolts, the rear track bar bracket, extended sway bar end links, bump stops and 3.5-inch front and rear coil springs.
Not included: shock absorbers.






