Overview
The Rubicon Express RE7231 is an Extreme-Duty long arm upgrade for TJ Wrangler owners who already run a Rubicon Express Super-Flex short arm suspension. It replaces the short arm parts with chromoly Extreme-Duty long arms, front and rear lower, plus rear upper arms. It is designed to sharpen on-road handling while keeping the ride close to stock.
The upgrade includes a three-piece belly pan for access to the transfer case and transmission, along with rear stainless steel brake lines. The long arms are chromoly. It also includes PT-Meg Super-Ride bushings and adjustable control arms with serviceable Super-Flex spherical ball joints. Lift height depends on the system being upgraded and falls within 5 to 6.99 inches.
Key features
- Extreme-Duty long arm upgrade for TJ owners with a Super-Flex short arm system
- Chromoly front and rear lower long arms
- Rear upper control arms
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings
- Three-piece belly pan for transfer case and transmission access
- Rear stainless steel brake lines
Before you install
Long arms take over locating the axle, so they are the main part of this upgrade that controls wheel travel and braking loads. Because the short arm parts come off, the geometry is replaced rather than adjusted, which makes the install a larger job than a single component swap. Plan for a full alignment once the arms are on, since caster and pinion angle both change when arm length changes.
The belly pan and rear brake lines are often installed in the same session, because the transfer case and rear axle are open during the work. Adjustable arms and serviceable joints make later tuning easier, but they still need inspection when a vehicle sees hard trail use. Recheck the joints and bushings after the first few drives.
- Check driveline angles before the first highway run
- Re-torque arm mounts after early trail outings
- Look over brake lines where they pass the axle
- Keep a spare set of bushings for longer trips
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7231 |
| UPC | 614901441871 |
| Kit type | Extreme-Duty long arm upgrade |
| Lift height | Depends on the system being upgraded (chart range 5 to 6.99 inches) |
| Long arms | Chromoly, front and rear lower; rear upper |
| Joints | Serviceable Super-Flex spherical ball joints |
| Bushings | PT-Meg Super-Ride |
| Belly pan | Three-piece |
| Shocks | Not included |
Vehicle fitment
This upgrade covers the 1997-2006 Jeep Wrangler (TJ) and is meant for owners who already have a Rubicon Express Super-Flex short arm system.
Confirm your vehicle’s year, model and trim before ordering. This is an upgrade for an existing Super-Flex system, not a complete lift on its own.
Installation notes
Long arms replace the short arm geometry, so the alignment and driveline angles should be checked after the upgrade is installed. The three-piece belly pan is installed for transfer case and transmission access.
What’s included
The upgrade includes chromoly Extreme-Duty long arms, rear upper control arms, a three-piece belly pan and rear stainless steel brake lines.
Not included: shock absorbers.


