Overview
The Rubicon Express RXJ907P is a rear 2.5-inch Extreme-Duty monotube shock for the 2020–2026 Jeep Gladiator, sold under the R/ERXJ907P part number. It covers the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
The shock uses a 2.5-inch monotube body that is hard-anodized from thick-wall impact forging. The aluminum body releases heat quickly and resists the rust that steel bodies can develop. Hard anodizing reduces friction and bore wear, helping the bore stay in good condition over time.
The shaft is a chrome-plated 17-4 stainless precipitation-hardened rod. Thick-wall steel sleeves sit inside cross-linked urethane bushings that add durability. Each part number is tuned for its vehicle, so this rear shock is matched to the Gladiator application covered by its fitment.
The shock is hydraulic, with eyelet top and bottom mounts. Rubicon Express treats the tuning as the reason for its ride quality. The part number covers the rear position only, so front shocks are a separate part with their own number.
Key features
- 2.5-inch monotube body
- Hard-anodized, impact-forged aluminum body
- Chrome-plated 17-4 stainless shaft
- Steel sleeves inside cross-linked urethane bushings
- Eyelet top and bottom mounts
- Hydraulic damping
- Vehicle-specific tuning
Keeping the rear end sorted
Hydraulic shocks turn the up-and-down motion of the axle into heat as oil passes through the valving. A shock that runs hot for long periods can lose some damping, which is one reason aluminum bodies help move heat away. Rear shocks also carry the vehicle load at rest, so they are a common place to notice sag when springs or bump stops wear.
Routine checks are simple. Look for an oil film on the shaft or body, listen for knocking at the eyelets, and confirm the mounting hardware is tight. Inspect shocks after rough trail use or any hard impact, since a bent shaft or damaged seal can lead to leaks. When one rear shock is worn, replacing the pair keeps the rear end balanced.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXJ907P (R/ERXJ907P) |
| Series | Extreme-Duty Monotube |
| Body diameter | 2.5 inches |
| Position | Rear |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Shock type | Monotube, hydraulic |
| Body | Hard-anodized aluminum |
| Shaft | 17-4 stainless, chrome plated |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2020–2026 Jeep Gladiator, including the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
Wrangler models and Gladiator years outside 2020–2026 are not covered here. Compare your year, model and trim against this application first.
What’s included
One rear shock absorber.



















