Overview
The Skyjacker M9397 is a rear M95 Performance Monotube shock absorber for a 3 to 3.5 inch lift on the 2020–2026 Jeep Gladiator. It has eyelet mounts at the top and bottom and is charged with high pressure nitrogen gas.
The M95 shocks are custom tuned for each vehicle they fit. This rear unit has a chromed piston rod, a 46mm bore and a 180 degree directional mount.
Key features
- Rear position for the Gladiator
- Lift range of 3 to 3.5 inch
- Eyelet mounts at the top and bottom
- Monotube design with high pressure nitrogen gas
- Chromed piston rod
- Large 46mm bore
- 180 degree directional mounting
- Limited lifetime warranty
Gladiator rear suspension basics
A rear shock on a Gladiator controls how the axle moves over bumps and how the bed settles when the truck is loaded. Because the rear carries different loads than the front, a rear shock is chosen for its position, its lift and the weight the truck usually carries.
Custom tuning means the shock is matched to the vehicle it is sold for, but the surrounding parts still matter. Worn bushings, damaged eyelets or a worn bump stop can change how the shock works. Inspect these whenever the rear shock is replaced, and keep the mounts free of dirt and rust.
- Look for oil on the shock body
- Check eyelet mounts for wear or cracks
- Inspect rear bump stops and bushings
- Recheck fasteners after rough trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYM9397 |
| Shock series | M95 Performance |
| Position | Rear |
| Lift range | 3 to 3.5 inch |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Shock type | Monotube |
| Charge | High pressure nitrogen gas |
| Piston rod | Chromed |
| Body bore | 46mm |
| Warranty | Limited lifetime warranty |
Vehicle fitment
The shock fits 2020–2026 Jeep Gladiator (JT) models, including Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
The list does not cover the Wrangler JL or JK, or Gladiator years before 2020. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rear shock is rated for a 3 to 3.5 inch lift, so check the lift height on your Gladiator before ordering. Have the alignment checked after installation.
What’s included
Each shock comes separately, so review the mounting hardware on your truck before installation.
Not included: the second rear shock.









