Overview
The Rubicon Express JT7141E is a 2.5/3.5 inch standard suspension lift kit with shock extensions for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the Gladiator JT trims covered below.
The kit uses coil springs at the rear, with a lift height range of 0 to 3.5 inches and a 35-inch tire size listed. The specifications mark shocks as included, but name no front shock and no shock brand.
The system is bolt-on, and installation does not require driveshaft, exhaust or brake line changes. It gives room for 37-inch tall tires and added ground clearance.
Key features
- 2.5/3.5 inch standard suspension lift
- Shock extensions for the shocks in use
- Coil spring rear lift method
- Bolt-on design, per the brand
- Room for 37-inch tall tires with a bolt-on install.
Shock extensions and travel
Shock extensions lengthen the shock body so it can reach the suspension at a higher ride height. They are most useful when the existing shock is close to its limit at the new height, but they change the operating range, so the extended length needs to be checked against full suspension movement. A shock that cannot fully extend can strain its mounts, while one that runs too long can cause the bushing to bind.
Extensions add a point of stress at the joints, so inspect the threads, locking hardware and mounting bolts regularly. After the first few days of normal driving, look for rubbing near the shock or spring perch, and recheck the bolts. Replacing worn bushings before adding extensions is the better order of work.
- Check thread engagement and locking hardware
- Look for rubbing at the spring perch
- Replace worn bushings before adding extensions
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7141E (JT7141E) |
| Kit type | Standard suspension lift kit with shock extensions |
| Lift | 2.5 to 3.5 inch |
| Lift height range | 0 to 3.5 inches |
| Tire size | 35 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Front shocks | None listed |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
Covered trims for the 2020–2026 Gladiator are 80th Anniversary, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport.
Wrangler models and Gladiator years outside 2020–2026 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Shock extensions change the length the shocks operate at, so the shock travel and the alignment should be checked after installation.
What’s included
Shock extensions and shocks come with the kit, along with the coil spring rear lift for the rear.













