Overview
The Rubicon Express RM12040 is a 1-inch female rod end coupler with a 1-inch-14 right-hand thread. It is made for replacing a damaged rod end on a tube with at least a 1-1/4-inch inside diameter.
It is sold as a single unit, and the joint is not included.
Key features
- 1-inch-14 thread size
- Right-hand thread direction
- Minimum tube inside diameter of 1-1/4 inches
- Joint not included
- Jam nut not included
Installing a rod end coupler
A female coupler threads onto the end of a tube, and the rod end is threaded into the coupler, so the thread engagement determines how solid the joint feels. Clean the threads before assembly and check that the coupler turns smoothly by hand. Stop and recheck if it binds, since cross-threading ruins both parts.
Once the coupler is in place, the jam nut locks it against the tube so it cannot back out under load. Set the coupler’s length before tightening, and leave room for the joint to articulate freely. After the first drive, look at the jam nut and the coupler threads for movement or loosening.
- Clean and lightly oil the threads before assembly
- Set the length before the jam nut is tightened
- Recheck the jam nut after the first few drives
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM12040 |
| Thread size | 1 inch-14 |
| Thread direction | Right hand |
| Minimum tube inside diameter | 1-1/4 inches |
| Jam nut | Not included |
| Joint | Not included |
Vehicle fitment
No vehicle is named. The coupler is sized to a tube and thread, so the fit depends on the tube diameter and thread on your rod end rather than on a model.
Confirm the tube inside diameter and thread size on your rod end before ordering.
Installation notes
The jam nut and joint are sold separately, so have both on hand before the coupler goes in.








