Overview
The Rancho RS55380 is a rear RS5000X Series shock absorber for Chevrolet Silverado and GMC Sierra trucks. The 2500 HD is covered for 2011 through 2017 and the 3500 HD for 2011 through 2016, and the shock is a gas-pressurized twin tube design.
The valving pairs progressive engagement with a tuned compression control valve, aimed at better handling on and off road. Lift/drop is 0 in., so it suits trucks at factory height.
Key features
- Progressive engagement valving
- Tuned compression control valve
- Gas-pressurized twin tube body
- 16 mm nitro carburized rod
- Full displaced 35 mm bore
- Rebound bumper and low friction, self-lubricating seal
- Glass filled, Fluon banded piston
- Protective boot and black natural bushings
How the damper works
A shock absorber controls how quickly the spring compresses and rebounds. Inside the body, a piston moves through oil and forces it through valve passages. Compression valving governs the wheel moving up, and rebound valving governs the wheel dropping back. Progressive valving changes resistance gradually as speed increases, which keeps a heavy pickup from feeling harsh on small bumps while still controlling larger movements.
A rear shock works with the springs and the axle, so a worn unit often shows up as bouncing after bumps or a body that keeps moving after a stop. Gas pressure helps keep the oil from foaming during repeated hard use, which is why gas-pressurized bodies are common on trucks that tow or drive rough roads.
- Check for oil leaks on the body and around the rod seal
- Inspect the mounting bushings for cracks or play
- Look for a torn protective boot that lets grit reach the rod
- Replace shocks in pairs on the same axle for even handling
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55380 |
| UPC | 39703007313 |
| Series | RS5000X Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift/drop | 0 in. |
| Rod | 16 mm nitro carburized |
| Bore | Full displaced 35 mm |
| Piston | Glass filled, Fluon banded |
| Bushings | Black natural |
Vehicle fitment
It fits 2500 HD models for 2011 through 2017 and 3500 HD models for 2011 through 2016. Chevrolet Silverado trims include High Country, LT, LTZ and WT, and GMC Sierra trims include Base, Denali, SLE, SLT and WT.
A 2017 3500 HD and any 2018 model are not on this list, and 1500 trucks are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because it is direct fit, it lines up with the factory rear mounts on the covered models. Check the mounts against your existing shock before installing. Support the rear axle with a jack stand before disconnecting the old shock.
What’s included
One rear shock absorber is supplied. Look over the included parts against your installation before starting.












