Overview
The Rancho RS55379 is a rear RS5000X Series shock absorber for 2011–2018 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD trucks. It is a gas-pressurized twin tube design that replaces the factory rear shock on these heavy-duty models.
It pairs progressive engagement valving with a tuned compression control valve and a rebound bumper. Its lift range is w/0-1 – 1.25 in., so check your rear suspension height before selecting this part.
Key features
- Progressive engagement valving
- Tuned compression control valve
- Gas-pressurized twin tube body
- Rebound bumper
- 16 mm nitro carburized rod
- Full displaced 35 mm bore
- Glass filled, Fluon banded piston
- Double welded loops
Rear suspension checks
Rear shocks on heavy-duty pickups manage the axle’s movement under changing loads. When the truck is unloaded, a rear shock that has lost damping can let the body bounce for longer than it should. A consistent response across the stroke helps the rear end track straight over ruts and expansion joints.
Rebound bumpers and bushings are worth inspecting whenever a rear shock is replaced. A flattened or cracked bumper can allow the suspension to bottom out over hard hits. Check the leaf springs and bump stops at the same time, since rear suspension parts often wear together.
- Inspect rebound bumpers for cracking or flattening
- Check leaf springs and bump stops during the job
- Replace rear shocks in pairs where possible
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55379 |
| UPC | 39703008525 |
| Series | RS5000X Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift | w/0-1 – 1.25 in. lift |
| Rod | 16 mm nitro carburized |
| Bore | Full displaced 35 mm |
| Piston | Glass filled, Fluon banded |
| Bushings | Black natural |
| Seal | Low friction, self lubricating |
Vehicle fitment
Progressive engagement valving and a tuned compression control valve support controlled damping. Fitment covers 2011 through 2018 Chevrolet Silverado 2500 HD and 3500 HD in the High Country, LT, LTZ and WT trims, and GMC Sierra 2500 HD and 3500 HD in the Base, Denali, SLE, SLT and WT trims.
Light-duty 1500 trucks are not on this list, and years outside 2011 through 2018 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the upper and lower mounts with the old rear unit before beginning. Support the rear axle with a jack stand once the old shock is detached.
What’s included
One rear shock absorber. Check the package contents against your installation before starting.









