Overview
The Rancho RS999244 is a front shock absorber in the RS9000XL Series, rated for a 4 in. lift. Its 2.75-in. (70mm) body and 18mm chrome piston rod work with 9-position myRide tuning, adjustable by hand or with the remote.
It is a direct fit shock for Jeep vehicles and carries a Limited Lifetime Warranty. Check your suspension lift and your year, model and trim before buying.
Key features
- Rated for a 4 in. lift
- 9-position myRide manual or remote tuning
- 18mm chrome piston rod
- Nitrogen gas charged
- Polyurethane bushings and liquid metallic finish
- Protective boot included
- Limited Lifetime Warranty
Front shocks and lift height
Front shocks handle steering loads and much of the braking force, so their damping affects how the vehicle feels when turning and stopping. When a suspension is lifted, the front shock works at a different length and angle, which is why a lift rating matters. A shock sized for a stock height can bottom out or extend too far after a lift, reducing control.
Front shocks often wear alongside other steering and suspension parts, so inspect ball joints, tie rod ends and control arm bushings when a shock is replaced. Look for fluid on the body, clunking over bumps or uneven front tire wear as signs the shock is worn. Replacing both front shocks together helps keep the steering balanced. Keep the boot clean and free of grit to protect the rod. Recheck the fit after any future lift change.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999244 |
| UPC | 10039703092446 |
| Shock series | RS9000XL |
| Position | Front |
| Lift rating | 4 in. lift |
| Fitment type | Direct fit |
| Body diameter | 2.75 in. (70mm) |
| Piston rod | 18mm chrome |
| Charge | Gas charged (nitrogen) |
| Tuning | 9-position, manual or remote |
| Bushings | Polyurethane |
| Finish | Liquid metallic |
| Warranty | Limited Lifetime |
Vehicle fitment
Your year, model and trim decide fit, so review them before ordering. It is a direct fit shock for Jeep vehicles, and its 4 in. lift rating is the main application detail.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock is rated for a 4 in. lift, so match it to your suspension lift before fitting it and confirm the rating suits your setup.
What’s included
One RS999244 front shock absorber with its protective boot.














