Overview
The Rancho RS55319 is a rear RS5000X Series gas shock absorber for the 2005–2018 Toyota Tacoma. It is a direct-fit shock built around the patented rebound valving system and an advanced compression phase that Rancho’s ride engineers developed to sharpen handling on pavement and off-road.
The shock is nitrogen gas charged, finished in a liquid metallic coating and backed by a limited lifetime warranty. Its 22.42 in. extended length and 8.66 in. of stroke suit Tacoma owners who want one damper for daily driving and trail use. The lift/drop rating is 0 in.
Key features
- Patented rebound valving system for controlled damping
- Advanced compression phase developed by Rancho ride engineers
- Nitrogen gas charged body
- Liquid metallic finish
- Rear position, direct-fit design for Tacoma trucks
- Limited lifetime warranty from Rancho
Tacoma rear shocks and daily use
A Tacoma that sees both highway commuting and trail use puts varied demands on the rear dampers. Rear shocks control body motion over washboard surfaces and help keep the tires on the ground when the bed is loaded. Gas-charged designs keep damping more consistent as the shock heats during longer drives.
Because gas-charged bodies hold pressure, handling them correctly matters. Keep heat away from the body during installation, and avoid any cuts or punctures to the shell. Check the mounts and bushings whenever the shock is removed, since a worn eye can cause noise that is easy to mistake for a damper problem.
- Check for leaks or oil on the body
- Inspect mounting hardware at each service
- Replace rear shocks in matched sets for even handling
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS55319 |
| UPC | 39703008501 |
| Series | RS5000X Series |
| Position | Rear |
| Fitment type | Direct fit |
| Extended length | 22.42 in. |
| Collapsed length | 13.76 in. |
| Stroke | 8.66 in. |
| Body diameter | 2.75 in. (on select applications) |
| Piston rod diameter | 18 mm (on select applications) |
| Gas charge | Nitrogen |
| Finish | Liquid metallic |
| Lift/drop rating | 0 in. |
| Warranty | Limited lifetime |
Vehicle fitment
Fitment covers the 2005–2018 Toyota Tacoma in the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims. For those trucks the RS55319 is a direct fit at 0 in. lift/drop.
Earlier Tacoma model years before 2005 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gas-charged shocks are pressurized, so do not heat, puncture or open the body. Support the rear axle while the RS55319 is removed.
What’s included
One RS5000X Series rear shock absorber, Rancho part RS55319.












