Overview
The Rough Country 89709 is a 33.5 inch extended front stainless steel brake line, sold individually, for the 2017–2022 Ford F-250 and F-350 Super Duty with 4.5 to 6 inches of suspension lift.
Rough Country designed the line for owners who want to swap out worn or decaying factory rubber lines. The braided stainless steel exterior keeps rocks, mud and debris from damaging the line, and it prevents expansion of the inner Teflon layer, which Rough Country says gives a noticeably firmer brake pedal feel. Rough Country says its DOT approved brake line kits offer the extra length needed to install on a lifted application, which makes them a fit for anyone who wants to replace poorly performing or decaying factory brake lines. High-quality hollow fasteners at both ends of the line provide a leak-free flow path.
Key features
- Front brake line, 33.5 inches long
- Sold individually
- DOT approved
- Braided stainless steel exterior against off-road debris
- Pressure tested to 4,000 psi
- Hollow fasteners at both ends for a leak-free flow path
- Recommended for 4.5 inches to 6 inches of lift
Brake line routing and inspection
A longer brake line on a lifted truck has to be routed so that it does not rub, pinch or stretch under suspension movement. The line should follow the frame or existing bracketing and keep a clear path away from sharp edges, moving linkage and the exhaust. Slack in the line is best taken up with proper routing rather than with extra loops that can catch debris.
After installing any brake line, bleed the system thoroughly and check the connections for seepage. Brake pedal feel should be firm and consistent before the truck is driven. Re-check the fittings after the first few drives and again after the truck has been off road, since vibration can change the position of the line.
Inspect the lines periodically. Look for chafing at clips, bulges, kinks, and wetness near the fittings. A line that feels soft under pressure or shows any sign of damage should be replaced rather than repaired.
- Bleed the system after installation
- Check fittings after the first drives
- Look for chafing at clips and bulges
- Route slack clear of pinch points
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 89709 |
| Type | Extended braided stainless steel brake line |
| Position | Front |
| Quantity | Sold individually |
| Length | 33.5 inches |
| Material | Stainless steel |
| Pressure test | 4,000 psi |
| Recommended lift | 4.5 inches to 6 inches |
| Fitment type | Direct fit |
| Standard | DOT approved |
Vehicle fitment
The 89709 fits the 2017–2022 Ford F-250 Super Duty and F-350 Super Duty. Super Duty trucks built before 2017 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Rough Country says models with less than 4.5 inches of lift may have excess slack, which must be kept away from pinch areas. Super Duty trucks built before 2017 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rough Country recommends the 89709 for models with 4.5 inches to 6 inches of suspension lift. Where the lift is lower than 4.5 inches, the longer line can leave extra slack that has to be routed clear of pinch areas.
What’s included
The 33.5 inch front line replaces a factory rubber line on each affected side; sold individually, one line is supplied per box. High-quality hollow fasteners at both ends provide the connection.









