Overview
The Pro Comp 7220-AB is a braided stainless steel front brake hose for 1979 to 1986 Chevy and GMC K1500 and K1500 Suburban models. It is a single hose that fits either the driver or passenger side and is sized to suit a lift of 0 to 6 inches.
Pro Comp points out that if the ride height has been raised, the stainless flexible line will not swell under the extra braking pressure that larger tires create. The hose measures 23.50 inches, with a 7/16 GM banjo end and a 3/8 x 24 female end.
Key features
- Braided stainless steel flexible brake line
- Fits the driver or passenger side
- Front hose, 23.50 inch long
- 7/16 GM banjo to 3/8 x 24 female ends
- 5/8 x 18 mount
- Works with a 0 to 6 inch lift
Choosing a replacement hose
Front brake hoses bear the most movement because they follow steering and suspension travel. A hose that is too short can be stretched at full droop, and one that is too long can rub against tires or frame parts. Measure the old hose end to end and compare the fittings before ordering, paying close attention to the banjo end and the threaded end.
Front hoses usually wear together, so inspect the other side at the same time. Banjo fittings use washers that should be replaced whenever a fitting is loosened, and the threaded connections should be snug without overtightening. Keep hoses clear of hot exhaust parts and sharp edges when routing them.
- Check both front corners at the same time
- Replace banjo washers when fittings are loosened
- Route the hose away from exhaust and sharp edges
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 7220-AB |
| UPC | 614901180176 |
| Product type | Front brake hose |
| Hose material | Braided stainless steel |
| Position | Front, driver or passenger side |
| Length | 23.50 inch |
| End fittings | 7/16 GM banjo to 3/8 x 24 female |
| Mount | 5/8 x 18 |
| Lift height | 0 to 6 inch |
| Quantity | One hose |
| Fitment type | Direct fit |
Vehicle fitment
It fits 1979 to 1986 Chevy and GMC K1500 and K1500 Suburban models.
Other years of K1500 and Suburban are not covered, and one hose serves only one corner, so a second hose is needed for the opposite side. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the 7220-AB is a single hose that suits either side, a pair is needed to do both front corners. Bleed the brake system after the hoses are installed.
What’s included
One braided stainless steel front brake hose.









