Overview
The Rough Country Shackle Reversal Kit, part 5059, is a backplate kit for the 1976-1983 Jeep CJ5, the 1976-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler. It relocates the front spring shackles to the rear mount.
The reversal gives a more stable ride with less rebound in the front end. It works on lifted or factory height vehicles and adds about 1/2 inch of lift. No welding is needed.
The backplates are black powder coated. The kit moves a shackle position rather than replacing the spring.
Key features
- Relocates front spring shackles to the rear mount
- Less rebound in the front end.
- No cutting, drilling or welding required
- About 1/2 inch of lift
- Black powder coat finish
- Works on lifted or factory height vehicles
Front suspension after reversal
Moving the front shackle to the rear mount changes the way the front spring pivots, which affects how the axle sits and how it reacts to bumps. Less rebound is often a goal of this kind of change. Check the spring eye and the new mount for wear before fitting, since the mount now carries a different load path.
After installation, look at the front brake lines and steering linkage for clearance at full articulation. Keep an eye on steering feel and any change in front end response on the trail. Retighten the fasteners after the first few drives, and recheck them after any hard off-road use.
- Check brake lines at full articulation
- Recheck fasteners after the first drives
- Inspect spring eyes for wear before fitting
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 5059 |
| Type | Backplates |
| Finish | Black powder coat |
| Lift | About 1/2 inch |
| Installation | No cutting or drilling required |
Vehicle fitment
It fits the 1976-1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976-1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981-1985 Jeep Scrambler.
The Wrangler YJ and Wrangler TJ fall outside this fitment. Match your vehicle’s year, model and trim to the coverage before buying.
Installation notes
The kit installs without cutting, drilling or welding. Follow the fitting steps carefully and compare the parts with your installation before starting.
What’s included
The backplate reversal kit is included.









