Overview
The Daystar 0.5 Inch Lift Greasable Super Shackles, part KJ61005BK, are a pair of rear shackles for the 1976-1983 Jeep CJ5, the 1976-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler. They give a 0.5 inch lift and are built for off-road use.
The shackles are made from heavy-duty plate steel with a fully welded center bar. The welded center bar reduces deflection and axle shift while cornering or when the suspension articulates.
Each shackle has grease-grooved polyurethane bushings, sleeves and gun-drilled bolts with an easy-to-reach grease zerk. The center bar is a fully welded round tube for added strength.
Daystar also offers stock replacement versions and lift versions up to 2-1/2 inch. Confirm the 0.5 inch pair matches the lift you want before ordering.
Key features
- 0.5 inch lift
- Fully welded center bar reduces deflection and axle shift
- Grease-grooved polyurethane bushings
- Rifle drilled greaseable bolts included
- Zinc plated finish
- Limited lifetime warranty.
Greasing and bushing life
Greaseable joints last longer when the grease is applied on a regular schedule and the old grease is pushed out through the bushing. Use a grease gun on the zerk until fresh grease appears at the sleeve, then wipe away the excess. Dirt and water can enter a dry joint quickly, so inspect the bushing seals after mud or water crossings.
A shackle set up with a greaseable bolt and grooved polyurethane bushing needs little else day to day. Look for cracks in the plate near the welds, and check that the center bar is still tight against the plate. Lift shackles also change the leaf spring angle a little, so recheck the bolts after the first few drives and re-torque as needed.
- Grease until fresh grease shows at the sleeve
- Inspect seals after water crossings
- Re-torque bolts after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61005BK |
| Position | Rear |
| Lift | 0.5 inch |
| Bushings | Grease-grooved polyurethane, black |
| Finish | Zinc plated |
| Quantity | Pair |
Vehicle fitment
Daystar lists these shackles for the 1976-1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976-1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981-1985 Jeep Scrambler.
The Wrangler YJ and the CJ models from 1987 on fall outside this fitment. Verify year, model and trim against your vehicle before buying.
Installation notes
The bushings and sleeves are included, and the bolts are greaseable through the zerk. Replacement and lift versions come in different sizes, so confirm the 0.5 inch pair matches the lift you want.
What’s included
A pair of shackles with polyurethane bushings, sleeves and rifle drilled greaseable bolts.









