Overview
The Daystar 1.5 Inch Lift Greasable Super Shackles, part KJ61006BK, are a pair of 1.5 inch lift shackles for the 1976-1983 Jeep CJ5, the 1976-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler.
The shackle is made from heavy-duty plate steel with a fully welded center bar. The bar reduces deflection and axle shift when the vehicle corners or articulates.
The kit includes greasable polyurethane bushings and gun-drilled bolts with a grease zerk. The shackles are zinc plated.
The line includes stock replacement versions and versions that provide up to 2-1/2 inch of lift. The 1.5 inch pair sits in the middle of that range, and lift size is chosen by application. One pair covers both sides of the vehicle, and the bushings and bolts come with the pair.
Key features
- 1.5 inch lift
- Fully welded center bar
- Heavy-duty plate steel construction
- Grease-grooved polyurethane bushings
- Gun-drilled greaseable bolts
- Zinc plated finish
Front shackle setup
A front shackle works in a different arc than a rear shackle, so its angle and bolt location should be checked after installation. Set the shackle so the bushing sits square and the bolt is fully seated. A misaligned pivot will bind, squeak and wear the bushing faster than a correctly set one.
Because a lift shackle changes the leaf spring geometry, check steering, brake line and sway bar clearance once the shackles are in. Recheck all fasteners after the first few drives, and confirm the bushing stays centered in the sleeve. Pick a lift that suits the vehicle’s use, since larger lifts load the joints more heavily over rough terrain.
- Confirm the bushing sits square
- Check brake line and sway bar clearance
- Recheck fasteners after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61006BK |
| Position | Front |
| Lift | 1.5 inch |
| Bushings | Grease-grooved polyurethane, black |
| Finish | Zinc plated |
| Quantity | Pair |
Vehicle fitment
The shackles fit the 1976-1983 Jeep CJ5, the 1976-1986 Jeep CJ7 and the 1981-1985 Jeep Scrambler in the trims covered by this fitment.
The Wrangler YJ and other Jeep models fall outside this fitment. Check that your year, model and trim are covered before ordering.
Installation notes
Install the shackles with the greaseable bolts and bushings supplied. The pair is for the front position, so confirm the front or rear position on your vehicle before fitting.
What’s included
A pair of shackles with polyurethane bushings, sleeves and rifle drilled greaseable bolts.












