Select your vehicle

Rough Country 2.5″ Toyota Lifted N3 Struts – 501091

Rough Country

$369.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 6:50 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front N3 Performance lifted struts for 2000–2006 Toyota Tundra with 2.5 inches of lift
  • Nitrogen charged monotube struts with a pre-installed coil
  • 3-year limited warranty
  • Part number 501091

Description

Overview

The Rough Country 501091 is a set of front N3 Performance lifted struts for the 2000–2006 Toyota Tundra in the Base, Limited and SR5 trims. Each strut is nitrogen charged and monotube, and it comes with a pre-installed coil spring, so the factory strut is replaced as a unit without disassembling it.

The struts add ride height while keeping a smooth, factory-like ride. The design has a large bore, a chrome-hardened piston rod and a leak-proof piston seal built for off-road durability. Each strut is tuned for its application and uses variable damping, which works across road conditions. The struts come with a 3-year limited warranty and must be installed without a strut spacer, for vehicles with 2.5 inches of lift. They are complete units, so installation is a swap rather than a rebuild.

Key features

  • Nitrogen charged monotube design
  • Pre-installed coil spring for fast installation
  • Chrome-hardened piston rod and leak-proof piston seal
  • Variable damping system for road control
  • 3-year limited warranty

Lifted struts and daily driving

A front strut carries much of the vehicle’s weight and handles most of the bump absorption at the front wheels. Replacing it with a lifted unit changes the ride height and the way the spring works, so the front end can feel firmer or more controlled than stock. A nitrogen charged monotube design keeps damping more consistent when the shock heats up on longer drives.

Before fitting a lifted strut, confirm the truck’s current height and the lift it needs, since the struts are designed for a specific amount of lift. Check the top mounts and nuts after the first few drives, and look for leaks at the piston seal over time. A mismatch between front and rear ride height can affect steering feel, so the rear should be checked as well.

  • Confirm the lift height before installing
  • Check top mounts after the first drives
  • Look for seepage at the piston seal

Specifications

Brand Rough Country
Part number 501091
Shock series N3 Performance
Shock type Monotube
Charge Gas charged (nitrogen)
Position Front
Lift requirement Fits vehicles with 2.5 inches of lift
Fitment type Direct fit

Vehicle fitment

Rough Country lists these struts for the 2000–2006 Toyota Tundra, including the Base, Limited and SR5 trims.

The list does not cover the Tundra from 1999 or 2007 onward. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The struts replace the factory strut without disassembly. They cannot be installed together with a strut spacer, and Rough Country says they only fit vehicles that have 2.5 inches of lift.

What’s included

Front N3 Performance lifted struts with pre-installed coil springs.

SKU: R/C501091 Categories: ,

Fitment

VehicleYearsTrims
Toyota Tundra2000–2006Base, Limited, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Can I use these struts with a strut spacer?

No. The N3 Performance lifted struts cannot be used with a strut spacer, so any spacer on the truck must come off first.

Does the strut need to be taken apart?

No. The coil spring is already installed on each strut, so the factory strut is removed and replaced as a single unit without disassembly.

What warranty comes with these struts?

A 3-year limited warranty. The struts are nitrogen charged and come with a pre-loaded coil for quicker installation, which makes the swap simpler.

How should I check a strut after installation?

Look for fluid seepage at the piston seal, listen for knocking over bumps, and watch for uneven tire wear. Check the strut mounts and top nuts after the first few drives.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon