Overview
The Rough Country R/C68230 is a 4-inch Jeep suspension lift kit with N3 shocks for 2007–2018 Jeep Wrangler (JK) two-door models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions. It uses lifted coil springs and coil correction plates for lift height and to dampen vibration on any terrain.
The shocks are N3 units with 10-stage variable valving and high-pressure nitrogen charge. They have an 18mm spring-loaded piston rod and a 54mm shock body, and the brand rates them at up to 36kN tensile strength. The shocks have natural rubber bushings and a metallic silver finish.
Coil correction plates position the coil correctly when the coil is raised, which helps dampen vibration. The N3 shocks use the same valving and rod size as the R/C68130 kit.
Confirm driveline length for your two-door setup before ordering.
Key features
- Lifted coil springs and coil correction plates
- N3 shocks at the front and rear
- 10-stage variable valving and nitrogen charge
- 18mm spring-loaded piston rod and 54mm shock body
- Tensile strength rated at up to 36kN
- Metallic silver finish on the shocks
Two-door Wrangler suspension care
Two-door Wranglers handle differently from Unlimited models because the shorter wheelbase changes the way the body and axles react to bumps. A lift raises the center of gravity, so body roll and steering feel should be checked during the first drives. Lifted coil springs keep their ride height only when the coils seat properly and the plates stay solid.
Routine inspection matters on a two-door lift. Look at the bump stops, sway bar links and control arm bushings for wear, and check the shock mounts for cracks. Tire pressure and tire size changes also affect steering feel and load on the front axle. Keep a simple log of inspections so changes are caught early.
- Check coil seating and plate bolts
- Inspect bump stops for cracks
- Recheck sway bar links after articulation
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C68230 |
| Lift kit | 4 inches |
| Shock series | N3 |
| Valving | 10-stage variable |
| Piston rod | 18mm spring-loaded |
| Shock body | 54mm |
| Tensile strength | 36kN |
| Bushings | Natural rubber |
| Finish | Metallic silver |
| Lift height range | 4 to 5.5 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK) two-door models. Four-door Unlimited models and Wrangler JL models are not covered.
Four-door Unlimited models are not covered by this kit, and Wrangler JL models are not on the list.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Models from 2012 to 2018 need exhaust modifications to clear the front driveshaft, a required step before installation. On automatic models, a larger factory driveshaft can touch the transmission pan during heavy articulation, and a smaller aftermarket driveshaft is available for that case.
What’s included
Lifted coil springs, coil correction plates and four N3 shocks.










