Overview
The Rough Country 3.5-inch bolt-on suspension lift kit, part number R/C74231, fits the 2005–2023 Toyota Tacoma. It raises the truck with loaded N3 struts and fabricated rear blocks, and the included upper control arms are tubular with Clevite rubber bushings.
The kit includes N3 nitrogen-charged shocks, which the brand says give ride quality on and off the pavement. The upper control arms are designed to keep the ball joint at optimum angles after lifting, which the brand says gives better range of motion with less stress, wear and tear.
Installation is a bolt-on process that requires minor cutting and drilling. It can be done with common tools in a home garage, and the truck can be returned to stock at any time.
Loaded struts combine the shock, spring and mount into one assembly, so the front is changed as a unit. The fabricated rear blocks are the rear lift component, and they add height between the springs and the axle.
Key features
- Tubular upper control arms designed for better ball joint angles
- Clevite rubber bushings for durability
- Loaded N3 struts at the front
- Fabricated rear blocks for lift height from front to rear
- N3 nitrogen-charged shocks
- Lifetime replacement warranty
Alignment and front geometry
A lift this size moves the lower control arm angles, steering geometry and caster. Tubular upper control arms help restore ball joint angles, but the alignment still needs to be set on the finished truck. Caster and toe are the settings most likely to drift on a lifted Tacoma, and uneven tire wear along one shoulder is the usual sign.
Loaded struts replace the shock, spring and mount as a unit, so the old front assembly should be inspected before it comes off. Check sway bar end links and brake hoses for stretch once the front is raised. Replacing worn tie rod ends at the same time is practical when the front end is already apart.
- Measure caster and toe after installation
- Inspect sway bar end links for play
- Check brake hoses for tension at full droop
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C74231 |
| Lift size | 3.5 inches |
| Upper control arms | Tubular, with Clevite rubber bushings |
| Front components | Loaded N3 struts |
| Rear components | Fabricated blocks |
| Shock type | N3 nitrogen-charged |
| Installation | Bolt-on, minor cutting and drilling |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2005–2023 Toyota Tacoma, including the Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner versions.
Toyota models other than the Tacoma are not on the list, and the years listed are the only ones covered by the kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install requires minor cutting and drilling, so plan for that work before starting. Have the alignment checked after the lift is installed, since the upper control arms change the front geometry.
What’s included
Tubular upper control arms with bushings, loaded N3 struts, fabricated rear blocks and N3 shocks.










