Overview
The Rock Krawler RKSRK06184 is an X Factor front lower control arm set for the 2018–2019 Jeep Wrangler (JL). The arms are made from 1.75 inch OD, 0.313 inch wall DOM steel and bent to improve ground clearance for off-road driving.
Each arm has an adjustable 1.25 inch shank Pro-Krawler joint at the frame, which offers 60 degrees of misalignment and can be serviced and rebuilt. The Pro-Flex joint on the frame side uses 70a durometer thermoelastomer raceways to isolate vibration, with 30 degrees of misalignment, for 90 degrees in total.
Key features
- 1.75 inch OD, 0.313 inch wall DOM steel
- Black powder coat finish
- Adjustable 1.25 inch shank Pro-Krawler joint, serviceable and rebuildable
- Pro-Flex joint with 70a durometer raceways
- 90 degrees total misalignment
Caster, alignment and matched arms
Front lower arms set the lower end of the suspension and affect caster, camber and steering feel. Because the arms are adjustable, any change in length shifts those angles, so the pair should be set with the same care on both sides. Matched arms help keep the wheels tracking evenly and the steering centered.
Before adjusting, check the joints for play and confirm the frame and axle mounts are sound. Set both arms to the same length, then have the front end aligned. Recheck the lock nuts after the first drives, since the threads can loosen under bumps.
Replacing both arms together keeps wear and geometry even from side to side. A single worn arm can pull the wheel off its intended path, so inspect the other side at the same time.
- Set both sides to the same length
- Recheck lock nuts after the first drives
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSRK06184 |
| Position | Front lower |
| Tube | 1.75 inch OD, 0.313 inch wall DOM steel |
| Finish | Black powder coat |
| Frame joint | Adjustable 1.25 inch shank Pro-Krawler joint, 60 degrees misalignment |
| Pro-Flex joint | 70a durometer thermoelastomer raceways, 30 degrees misalignment |
Vehicle fitment
It fits the 2018–2019 Jeep Wrangler (JL) in several 2-door and Unlimited 4-door versions, including Rubicon, Sport and Sahara models.
It is built for the 2018–2019 Jeep Wrangler (JL). Compare your Wrangler’s year and trim with the fit above before buying.
Installation notes
Adjustable arms change caster and alignment, so have the front end aligned after the length is set.
What’s included
A set of front lower control arms, tube type.









