Overview
The Rock Krawler RK05344 is a rear coilover shock for 2007–2017 Jeep Wrangler JK 2-door models, sold individually. It is a remote reservoir shock with a 4.5 inch lift height, a 2-5/8 inch fluted aluminum body and a coilover design.
The fluted aluminum body is lighter than a comparable steel body, and the fluting adds structure so the aluminum cylinders stay strong. The body has a military grade hard anodized coating for corrosion resistance. Inside, the shock uses a Nitrotec steel shaft, a DU bearing, a billet aluminum valve circuit and redundant sealing. The body offers more surface area than most 3 inch bodied shocks.
Key features
- Fluted aluminum shock body, 2-5/8 inch diameter, designed to cut weight while keeping strength.
- Military grade hard anodized surface on the body for corrosion resistance.
- Nitrotec steel shaft left bare rather than chrome plated, so plating pitting or flaking cannot damage the seals.
- DU bearing supports the shaft.
- Billet aluminum valve circuit with digressive valving controls dampening.
- Redundant sealing technology keeps the shock oil inside the unit.
- Emulsion, gas charged design with shock oil formulated for fade-free dampening and smooth rebounds.
- High viscosity index and shear stability in the shock oil help control shock fade.
- 4.5 inch lift height in the coilover shock series.
Rear coilover fitment checks
A coilover combines the shock and spring in one assembly, so spring rate and ride height both change when it is installed. Before bolting it in, confirm that the spring, upper mount and lower mount all match the rest of the rear suspension. The reservoir adds bulk to the layout, so check that it does not contact the body, fuel lines or the tire at full compression.
Coilovers are usually set up as a pair, and matching both sides keeps the rear end balanced over bumps. Brake lines, sway bar links and any track bar should be checked for clearance through full travel. After the first few drives, recheck the mounting hardware and look for rubbing at the spring seats.
- Confirm the spring and mounts are in your kit
- Check brake line and sway bar clearance
- Recheck hardware after the first few drives
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RK05344 |
| UPC | 700007719981 |
| Shock series | Coilover |
| Lift height | 4.5 inch |
| Body size | 2-5/8 inch |
| Body material | Fluted aluminum |
| Body finish | Military grade hard anodized |
| Shaft | Nitrotec steel, bare (not chrome plated) |
| Bearing | DU bearing |
| Valve circuit | Billet aluminum, digressive valving |
| Shock type | Hydraulic, gas charged: emulsion |
| Fitment type | Direct fit |
| Vehicle doors | 2-door models |
| Quantity | Sold individually |
| Made in | U.S.A. |
Vehicle fitment
It fits the 2007–2017 Jeep Wrangler (JK) in 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, as a direct fit.
This fitment does not cover the earlier Wrangler TJ (1997–2006) or LJ (2004–2006), or the Wrangler JL introduced for 2018 and later. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a remote reservoir coilover, so the reservoir needs its own mounting location with clear routing away from the tire and suspension travel. Check clearance through the full range of suspension travel. Sold individually, so each rear position needs its own unit. Support the vehicle securely on jack stands before working on the rear suspension.
What’s included
One shock is included, sold individually.
Not included: A coil spring, mounting hardware and brackets. Confirm you have these parts before installation.








