Overview
The Pro Comp ES9000 Series Shock Absorber, part number 929504, is a rear twin tube gas-charged shock sized for a 6 in. lift. It is built for the 2004-2014 Ford F-150 and the 2007-2018 Jeep Wrangler (JK).
It is a nitrogen gas charged shock with 10 stage velocity sensitive valving for a smooth highway ride and better off-road handling. It has a 1-3/8 inch nylon banded full displacement piston head and double welded shock mounts. The shock is sold individually, and shock boots are sold separately.
Key features
- Twin tube design, nitrogen gas charged
- 10 stage velocity sensitive valving
- 1-3/8 inch nylon banded full displacement piston head
- Double welded shock mounts
- Extended 29.83 inch, collapsed 17.32 inch, travel 12.51 inch
- Loop upper and lower mounts; sold individually
Lift height and shock length
A 6 in. lift changes the suspension geometry, and the shock has to match the new ride height and travel. Lift height and shock length are linked, so a shock sized for a stock setup may bottom out or run out of extension after a lift. Confirm the installed length of the shock you are replacing before choosing a lift-matched unit.
Lifted trucks and Jeeps put more load on dampers during off-road runs, so inspection matters more. Check brake lines, hoses and wiring for clearance through full travel, and look for leaks from the shock body after the first trail trip.
- Measure installed length before ordering
- Check travel at full compression and extension
- Inspect upper and lower mounts after off-road use
- Replace worn shock boots if the rod seal is torn
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP929504 (929504) |
| UPC | 614901697834 |
| Shock series | ES9000 Series |
| Position | Rear |
| Lift height | With 6 in. lift |
| Type | Gas charged |
| Extended length | 29.83 inch |
| Collapsed length | 17.32 inch |
| Travel length | 12.51 inch |
| Upper and lower mount | Loop |
| Finish | White |
| Boot included | No (sold separately) |
| Adjustable | No |
| Remote reservoir | No |
| Sold as | Each |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 929504 covers: 2004–2014 Ford F-150 (FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT); 2007–2018 Jeep Wrangler (JK) (70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X).
The list has two different vehicle entries, the F-150 and the Wrangler (JK). Check which entry matches your vehicle and whether a 6 in. lift suits it. Other years and models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is a good choice. Support the vehicle on rated jack stands, never on a jack alone. Follow your vehicle’s service instructions and tighten all fasteners to the torque values for your vehicle. Re-check fasteners after the first miles and again after off-road use. Have the alignment checked after any suspension or steering work, and confirm brake lines, hoses and wiring clear the full suspension travel.
What’s included
One shock absorber, sold individually.
Not included: Shock boots are sold separately and are not included.
























