Overview
The Icon Suspension V.S. 2.0 Aluminum Series Rear Shock, part number 26520, is a gas charged rear shock for 2007 to 2017 Jeep Wrangler JK vehicles with a 2 to 3 inch lift. It is available for both 2-door and 4-door models and is vehicle specific, with valving tuned to the JK application.
It suits daily street driving and weekend off-road use. The nitrogen charged monotube design includes an internal reservoir, with a polished steel shaft and an aluminum body. It is 100% rebuildable and 100% revalveable, so the damping can be serviced or retuned later. Top mounting hardware and bushings are included, and the factory stock bolt is reused at the bottom mount.
Key features
- Vehicle specific valving for the Jeep JK rear, designed for a 2 to 3 inch lift
- Nitrogen charged monotube design with an internal reservoir
- Premium grade 5WT shock oil for consistent damping
- Polyurethane bushings with zinc plated sleeves
- Buna top out bumper for quiet, noise free operation
- 100% rebuildable and 100% revalveable
- Made in the U.S.A.
Rear shock maintenance on the JK
The rear shock on a Wrangler JK controls axle movement over ruts and bumps, and it works with the rear springs to keep the rear end settled. Nitrogen charged monotube designs keep damping steady as oil temperature rises, which helps on long highway drives and on trails. Rear shocks are often replaced in pairs so both sides control the axle the same way.
Inspect the shock every time the rear suspension is serviced. Look for oil on the body, a scored shaft, and bushings that have split or flattened. Check the factory bottom bolt for corrosion or stretching, since that bolt carries the lower mount. If the ride feels floaty or the rear bounces after a bump, the shock may need service or replacement.
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 26520 |
| UPC | 70000682324 |
| Shock series | 2.0 Shock Series |
| Position | Rear |
| Lift height | 2 to 3 inch |
| Charge type | Gas charged, nitrogen |
| Shaft | 5/8 inch polished nitro steel |
| Rod end | 6061 aluminum |
| Body | 6063 anodized aluminum |
| Shock oil | Premium grade 5WT |
| Bushings | Polyurethane with zinc plated sleeves |
| Top out bumper | Buna |
| Sold as | Single shock |
Vehicle fitment
It fits the 2007 to 2017 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, plus the Unlimited versions.
Wrangler TJ, LJ and JL models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Inspect the factory bottom bolt and its bushing before reinstalling the shock, since that bolt carries the lower mount. Fit the included top hardware and bushings at the upper mount. Stay within the 2 to 3 inch lift range the shock is built for. Support the vehicle securely before removing any rear shock.
What’s included
One rear shock with top mounting hardware and bushings. The bottom mount reuses the factory stock bolt.
Not included: a second shock, since this part is sold as a single unit.


