Overview
Rancho’s RS999330 is the rear RS9000XL shock for the 2007–2018 Jeep Wrangler JK, built for a 2.5 to 3 inch rear lift. It fits both two-door and four-door models and is meant to balance comfort on paved roads with control on harder off-road runs.
This nitrogen gas charged shock has an 18mm piston rod and a 9-position tuner that adjusts manually or through Rancho’s remote. Turning the setting changes how firm the rear end feels, which matters when the vehicle carries a lift and the weight shifts over rough ground.
Key features
- Rear position for a 2.5-3 inch lift
- 18mm diameter piston rod
- 9-position manual or remote tuning
- Nitrogen gas charged, gas charged hydraulic design
- Protective boot included
- Direct-fit design for the 2007–2018 Jeep Wrangler JK
Rear lift and damper balance
A rear damper has to handle both the lift and the load carried in the back of a Wrangler. A 2.5-3 inch lift shifts the geometry of the rear suspension, so the damper may sit at a different angle and work through a different part of its stroke. Checking ride height before and after the job helps match the shock to the suspension.
Rear shocks are often replaced with other rear parts when a lift is added. Bump stops, springs and control arm bushings all influence how the damper feels. Inspect them during installation, and confirm the rear lift measurement before tuning the setting.
- Measure rear ride height before and after
- Inspect bump stops and bushings
- Recheck tuning after heavy loads
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999330 |
| Shock series | RS9000XL Series |
| Position | Rear |
| Lift height | 2.5-3 inch (feature list); 2.5 in. (lift field) |
| Piston rod diameter | 18mm |
| Tuning | 9-position manual or remote |
| Charge | Nitrogen gas charged |
| Fitment type | Direct fit |
| Included | Protective boot |
Vehicle fitment
This rear shock is designed for the 2007–2018 Jeep Wrangler JK, across the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and their Unlimited counterparts.
Vehicles from the TJ, LJ and JL generations are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Two lift figures appear for this shock: 2.5-3 inch in the feature list and 2.5 in. in the lift field. Check your rear lift against both before choosing it.
What’s included
A rear RS9000XL shock absorber with protective boot included.












