Overview
The G2 Axle and Gear 16-RGB10 is a ring gear bolt that fastens the ring gear to the differential case. It is 2.1 in. long, made for a 10.5 in. differential, and marked with the code 14B.
Checking ring gear bolts
Ring gear bolts carry the full load of the ring gear, so they are a poor place to cut corners. They are often installed with thread-locker and tightened in a crisscross pattern so the ring gear seats flat against the case. Replacing the full set is the usual approach, since bolts that have been stretched once rarely hold their clamping force again.
Before reusing any bolt, look at the shank for stretching or a necked-down section, and check the threads for damage. Clean the threads and the bolt holes thoroughly so the new bolts seat correctly. Keep the ring gear and case mating surfaces clean, because a small burr can change the clamping load on every bolt.
- Inspect the shank for stretching
- Clean threads and bolt holes before fitting
- Tighten in a crisscross sequence
- Replace bolts as a complete set when in doubt
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 16-RGB10 |
| UPC | 682034185412 |
| Length | 2.1 in. |
| Differential size | 10.5 in. |
| Code | 14B |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Compare the 10.5 in. differential size with your ring gear and case before use.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check the package quantity and whether nuts are included against your installation before starting.








