Overview
The G2 Axle and Gear 16-RGB35 is a ring gear bolt that secures the ring gear to the differential case. It is identified by its brand, part number 16-RGB35 and UPC 682034369867.
Replacing ring gear bolts
Replacing ring gear bolts is a job where small details carry weight. The bolts hold the ring gear firmly to the case, and uneven clamping can cause runout or noise in the gear set. Clean all threads, check the holes for debris, and lay out the removed bolts in order so you can see which ones were under the most load.
Thread-locker is commonly used on ring gear fasteners, but the type should suit the original application and the bolt material. Apply it only to the threads, keep it off the ring gear face, and allow it to cure before the carrier is loaded or the axle is put back in service.
- Clean threads and holes before assembly
- Keep removed bolts in order
- Apply thread-locker to threads only
- Allow adhesive to cure fully
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 16-RGB35 |
| UPC | 682034369867 |
Vehicle fitment
Confirm the bolt’s application against your ring gear and differential case before installing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the bolt length and thread against the original hardware, since no dimensions are given here.
What’s included
Count the bolts in your package and check them against the original hardware before starting.








