Overview
The Radiance Amber Back-Light Pod, part number 20204, is a 3 inch square black pod with an amber back-light that can be controlled on its own. It is a universal pod with no vehicle named for it. The housing uses the same high-grade aluminum alloy as the D-Series lights.
The pod has forward projecting optics for its main light and an amber back-light. It is rated at 15 watts and 900 raw lumens, draws 1 amp and has three LEDs. It is IP68 rated, with an alloy housing and heatsink, and it is sold as a pair with mounting brackets. The same design is also available with white, green, blue and red back-lights.
Key features
- Amber back-light, independently controlled
- Forward projecting optics
- Black exposed printed circuit board
- Alloy housing and heatsink
- IP68 compliant with a high impact polycarbonate lens
Planning the power supply
Amber pods run on a low voltage DC supply, so the power source deserves attention before mounting. Tap a fused circuit that switches with the ignition or a dedicated switch, and check that the supply stays within the pod’s range when the engine is running. A voltage drop caused by thin wire or a long run can make the LEDs look dim or uneven, so keep the run short and use wire sized for the load.
Because the harness is a separate purchase, plan the cable route and connector type before ordering. Run the wire through a grommet where it passes metal, and keep it clear of hot components. Amber light is a common choice for work lighting, but check local rules on amber lighting before using the pods on public roads, since those rules vary by area.
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 20204 |
| UPC | 815711013368 |
| Series | Radiance Pod |
| Back-light | Amber, independently controlled |
| Housing | 3 inch square, black |
| Mounting | Surface, brackets included |
| Voltage | 9-15 V DC |
| Watts | 15 |
| Amp draw | 1 |
| LEDs | 3 |
| Raw lumens | 900 |
| Waterproof rating | IP68 |
| Beam | Fog |
Vehicle fitment
This universal pod has no year, make or model listed. Its surface mount and brackets set the fit, so choose a flat spot that suits the 3 inch square housing.
Confirm your vehicle’s year, model and trim before ordering any bracket.
Installation notes
The pod runs on 9 to 15 volts DC and needs a matching fused supply. The wiring harness is sold separately, so budget for it when planning the install, and check local rules on amber lighting before road use.
What’s included
Two Radiance Amber back-light pods with mounting brackets.
Not included: the wiring harness, which is sold separately.












