Overview
The Rigid Industries A-Series LED Rock Light Kit in amber, part number 400293, adds rock lights to a truck, Jeep or other all-terrain vehicle. The kit includes a distribution block, a switch and angled mounts. Its lights are A-Series LED units with amber lenses, designed for night crawling.
The kit has custom 15 leads on each light, which Rigid includes so the lights can be wired together. Rock light kits come in four-light or six-light configurations, and the A-Series lights are available in white, red, blue, green or amber to suit night crawling or to match the vehicle.
Key features
- A-Series LED rock lights with amber lenses
- 15 custom leads on each light
- Distribution block, switch and angled mounts included
- Four-light or six-light configurations
- Oval light shape, flush mounting
Wiring a rock light kit
Rock light kits are wired from a single power feed, so the distribution block is the central point where each light’s leads meet. Run the main feed from a fused connection near the battery or an accessory fuse panel, then route it to the block through a grommet. Keep the block mounted out of water spray and away from hot exhaust components.
Leads are the part most often damaged on a rock light install. Secure them every few inches with clips or zip ties, and leave a little slack at each light so suspension flex does not pull the connector apart. Where leads pass through the body or frame, use rubber grommets or split loom to prevent chafing.
- Fuse the supply close to the power source
- Seal connectors with dielectric grease
- Check light aim after the first few trails
- Recheck clips and mounts after rough terrain
Specifications
| Brand | Rigid Industries |
|---|---|
| Part number | 400293 |
| Series | A-Series LED rock light kit |
| Lens color | Amber |
| Light shape | Oval |
| Mounting location | Flush, with angled mounts |
| Bulb type | LED |
| Leads per light | 15 |
| Configurations | Four-light or six-light |
| Available colors | White, red, blue, green, amber |
Vehicle fitment
This is a universal lighting kit, not tied to a specific vehicle, year or model. The angled mounts and flush mounting let the lights suit trucks, Jeeps and other all-terrain vehicles, so check the spots you plan to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The distribution block and switch in the kit are the core of the wiring, so mount them where the 15 leads reach each light. Fuse the supply and check local rules for rock lights before using them on public roads.
What’s included
Rock lights with 15 leads each, a distribution block, a switch and angled mounts. The kit comes in four-light or six-light configurations.









