Select your vehicle

Rigid Industries SR-L Series Surface Mount LED Spreader Light (Red Halo) – 53122

Rigid Industries

$329.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 5:00 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rigid Industries SR-L Series surface mount spreader light, red halo, part number 53122
  • 120-degree horizontal beam, 1452 lumens, 14 watts
  • Surface mount with flying leads wiring
  • Universal accessory light, no vehicle named

Description

Overview

Part number 53122 is the red halo version of the SR-L Series surface mount spreader light. It mounts on the surface of a vehicle, and its 120-degree beam lights the wide area around the vehicle while the red halo adds accent backlighting.

The light is rated at 14 watts and 1452 lumens, with a maximum voltage of 36 and an amp draw of 1. It reads 8.40 lux at 10 m, with beam distances of 57.90 at 0.25 lux and 29 at 1 lux.

A red halo is a backlight that glows red around the lens. Some areas restrict red lighting on vehicles, so check local rules before using it.

Rigid offers this series in four halo colors, and red is one of them.

Key features

  • Surface mount design
  • Red halo backlight
  • 120-degree horizontal beam
  • Spread beam pattern
  • Impact resistant polycarbonate lens and high-grade aluminum housing

Keeping the light in good shape

Surface mount lights take more weather and debris than flush lights, so regular checks help. Look for loose mounting hardware, cracked lens edges and worn cable jackets after each trip. A clean lens keeps the beam even and the halo glow consistent.

Red halo lighting may draw attention on the road, and some areas limit red lighting on vehicles, so check local rules before fitting it to a vehicle used on public roads. For off-road use, a red halo can suit a camp or trail setting where accent lighting is wanted. Route the leads away from heat and moving parts, fuse the supply, and seal any wire joints. If the halo dims or flickers, inspect the connections first before assuming a fault in the light itself.

Specifications

Brand Rigid Industries
Part number 53122
Series SR-L Series Spreader, surface mount
Halo color Red
Mounting location Surface
Bulb type LED
Watts 14
Lumens 1452
Horizontal beam angle 120 degrees
Beam pattern Spread
Lux at 10 m 8.40
Beam distance at 0.25 lux 57.90
Beam distance at 1 lux 29
Voltage max 36 volts
Amp draw 1 amp
Quantity Single light

Vehicle fitment

This universal light is not made for one vehicle, year or model, and none is listed. The fit depends on the surface and the position you choose, so check the spot before fixing the housing in place.

Confirm your vehicle’s year, model and trim before ordering any bracket or harness.

Installation notes

Seal any wire joints against weather, whichever wiring route is chosen. Flying leads are the wiring for this light, and the RIGID harness, part 40300, is the separate option for a plug-in setup. Fuse the supply and check local rules before using a red halo light on public roads, since some areas limit red lighting.

What’s included

One SR-L Series surface mount spreader light with red halo and flying leads.

Not included: the RIGID wiring harness, part 40300.

Questions & Answers

What is the red halo on the SR-L 53122?

The red halo is a backlight that Rigid describes as accent lighting. It is available in red, blue, amber and white, and 53122 is the red version with a surface mount.

Does the Rigid 53122 spreader have a wide beam?

Yes. The light has a 120-degree horizontal beam with a spread pattern, which Rigid says lights wide areas around the vehicle. It is rated at 1452 lumens.

How is the 53122 wired?

It has flying leads for direct wiring into the electrical system. Rigid's wiring harness, part 40300, is sold separately if a plug-in connection is preferred.

What should be checked on the light after rough trail use?

Check the mounting hardware for looseness, look at the lens for cracks, and inspect the cable for chafing near the housing. Tighten fixings and re-seal any joints that have been exposed to water. A quick check after each trip helps catch small faults early.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon