Overview
The California Super Trucks 3 inch lift block kit, model CSB-D14-3, is a rear block kit for trucks with a 3 pin center pin leaf spring design. It is designed for that spring arrangement.
This kit is direct fit, and it is not tied to a particular year, make or model. Confirm your truck’s spring design and mounting before installing.
Key features
- 3 inch lift from a rear block kit
- Fabricated construction
- Designed for 3 pin center pin leaf springs
- Two piece kit
Leaf spring design and fit
A center pin block kit relies on the spring design to stay in place, so knowing the pin arrangement is the first step. Three pin center pin springs locate the block on the axle, while other spring designs may use different seats. Confirm your spring design before buying, since the kit is built around that arrangement.
Fabricated blocks are heavy and rely on sound seating surfaces. Clean the faces and remove rust before fitting, then check that the block is square to the spring. After installation, recheck the mounting hardware after the first drives and inspect the pins for wear. Routine inspections help catch any movement early in the life of the kit.
- Count the center pins on each spring
- Clean seating faces before fitting
- Recheck mounting hardware after the first drives
Specifications
| Brand | California Super Trucks |
|---|---|
| Model code | CSB-D14-3 |
| UPC | 70000445101 |
| Lift height | 3 inches |
| Construction | Fabricated |
| Center pin type | 3 pin |
| Pieces | 2 |
| Position | Rear |
| Fitment | Direct fit |
Vehicle fitment
Direct fit is the only fitment statement. No year, make or model is named, so the kit’s match to a given truck rests on its leaf spring design.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit has two pieces. Check the two pieces against your setup before you start.









