Overview
The Pro Comp Suspension 50165 is a U-bolt kit for leaf spring axles, with new hi-nuts and extra thick washers. Its U-bolts are equivalent in strength to a Grade 5 bolt.
Key features
- New hi-nuts
- Extra thick washers
- Grade 5 equivalent U-bolts
Centering the clamp
Once the kit is in place, a small rotation of the axle helps the U-bolts settle against the spring pack. Each U-bolt should then sit centered on the pack with the saddle flat and the legs running straight down. A clamp that sits off center can pinch the spring leaves or rub the brake line, so the position is worth checking before the nuts are fully tight.
Tighten the hardware in stages, moving between the nuts so the load spreads evenly. Recheck the centering after the first drive, because the spring pack can shift as it seats. Look for fresh scuffs on the axle tube or spring plate, which can show the clamp is pressing unevenly. Small adjustments now prevent larger problems later.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 50165 |
| UPC | 614901501650 |
| Material | Low-alloy high-strength steel |
| Strength | Grade 5 equivalent |
| Finish | Round zinc plated, square unplated |
| Fitment type | Direct fit |
Vehicle fitment
Check the rear axle and spring pack dimensions against the kit before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
After the kit is in place, rotate the axle slightly and recheck that each U-bolt sits centered against the spring pack, then tighten the hardware evenly.
What’s included
U-bolts with new hi-nuts and extra thick washers.









