Select your vehicle

REDARC Mounting Cup Gauge Holder – GH-CUP

Redarc

Shop Redarc Battery Battery Accessories on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • REDARC metal mounting cup for a 2-1/16 inch (52mm) voltage gauge
  • Part number RAEGH-CUP, model GH-CUP
  • Mounts with double sided tape or screws
  • Two-year product warranty; confirm whether you also need the gauge

Description

Overview

The REDARC Mounting Cup Gauge Holder, part number RAEGH-CUP, is a metal mounting cup made to complement the REDARC 2-1/16 inch (52mm) voltage gauge. REDARC designs the cup to be flexible when mounting a gauge, and it can be fixed with durable double sided tape or screws. No vehicle is named, because the cup is a gauge mount rather than a vehicle part.

Key features

  • Metal gauge mounting cup
  • Designed for the 2-1/16 inch (52mm) REDARC voltage gauge
  • Mounts with durable double sided tape or screws
  • Designed to be flexible for limited mounting space

Positioning and mounting a gauge cup

A gauge cup works best when the mounting spot is flat, clean and easy to read from the driver’s seat. Before picking a location, check that the gauge will not block controls, airbag covers or the view through the windshield. Routing the gauge wiring behind the dash or panel keeps the cable away from pedals and moving parts, and a neat run makes future service simpler.

Double sided tape suits smooth, clean surfaces but can lose grip on textured or oily plastic, so clean the area with a suitable solvent and let it dry before applying. Screws give a firmer hold on panels that can take them. Either way, check the gauge for vibration and tighten the mount if it moves, and keep heat sources such as heater outlets away from the cup.

  • Clean the mounting surface before applying tape
  • Route wires away from pedals and moving parts
  • Keep the gauge out of airbag zones
  • Recheck the mount after rough trail use

Specifications

Brand Redarc
Part number RAEGH-CUP
Model GH-CUP
Compatible gauge REDARC 2-1/16 inch (52mm) voltage gauge
Mounting Double sided tape or screws
Warranty Two-year product warranty

Vehicle fitment

The cup is a mount rather than a vehicle-specific part, and no make, model or year is given. Measure the panel you plan to use so the gauge and cup suit the space.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Choose double sided tape or screws based on the mounting surface, since both options are offered. Do not place the gauge where it blocks your controls or your view of the road.

What’s included

The mounting cup is the item described.

Not included: the REDARC 2-1/16 inch (52mm) voltage gauge, which the cup is designed to hold.

Questions & Answers

Does the REDARC GH-CUP come with a voltage gauge?

The cup is designed for the REDARC 2-1/16 inch (52mm) voltage gauge. Confirm whether the gauge is in your order before buying, since you need both.

How is the REDARC gauge holder mounted?

It mounts with either durable double sided tape or screws, so you can pick whichever suits your dash or panel. REDARC designs the cup to be flexible when mounting a gauge.

Is the GH-CUP a vehicle-specific part?

No. It is a gauge mount, and no make, model or year is named. The main question is whether the 2-1/16 inch gauge and your mounting spot suit each other before ordering.

How do you remove the gauge holder if you change your setup?

Warm double sided tape with a hair dryer on low heat, then ease the cup off with a plastic pry tool to avoid marking the panel. If the cup was screwed in, back out the fasteners and fill any holes as needed. Clean any adhesive residue before remounting.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Redarc Battery Battery Accessories on Amazon